Installing and Replacing Mobile Board Components
Installing a Processor
This section describes how to install a processor on the Mobile Board (see Figure 9).
CAUTION
Take care when handling the processor. Hold it by the edges to avoid touching the pins. Touching the pins may damage the processor.
To install a processor, follow these steps:
1.Observe the precautions in "Before You Begin" on page 35.
2.Locate the processor socket on the bottom of the Mobile Board (Figure 2, G).
3.Using a small
the unlocked position (Figure 9, ).
4.Align the processor (Figure 9, A) with the processor socket (Figure 9, B) so that the triangles match as shown in the figure.
5. | Insert the processor in the processor socket (Figure 9, ). |
6. | Rotate the processor socket locking screw to the locked position (Figure 9, ). |
|
|
Figure 9. Installing a Processor
37
