Intel Mobile Board MGM45WU Product Guide
Connecting Cables to the Bottom of the Mobile Board
This section describes where to connect various cables to the bottom of the Mobile Board after it has been installed in the chassis. To connect the cables, see Figure 16 and follow these steps:
1.Observe the precautions in "Before You Begin" on page 35.
2.With the chassis oriented as shown in Figure 16 (bottom side facing up), connect the cable from Expansion Board B to the Expansion Board B connector
(Figure 16, B) on the Mobile Board.
3.Connect the Bluetooth cable to the Bluetooth connector (Figure 16, A) on the Mobile Board.
4.Connect the speakers cable to the speakers connector (Figure 16, C) on the Mobile Board.
Figure 16. Connecting Cables to the Bottom of the Mobile Board
46
