Intel MGM45WU manual Installing Expansion Board a in the D-tray

Intel Mobile Board MGM45WU Product Guide

Installing Expansion Board A

To install Expansion Board A in the D-tray, see Figure 13 and follow these steps:

1.Observe the precautions in "Before You Begin" on page 35.

2.Connect the Expansion Board A cable connector (Figure 13, A) to the connector (Figure 13, B) on the bottom of Expansion Board A.

3.Place Expansion Board A (Figure 13, C) into the D-tray (Figure 13, D) on the matching standoffs (Figure 13, E). Make sure that the I/O ports align with the chassis I/O port openings and the alignment pin (Figure 13, F).

4.Route the Expansion Board A cable (Figure 13, G) through the chassis as shown in the figure.

5.Secure Expansion Board A to the D-tray with four screws (Figure 13, H) as shown.

Figure 13. Installing Expansion Board A in the D-tray

42