Intel MGM45WU Attaching the I/O Bezel

Intel Mobile Board MGM45WU Product Guide
40
Attaching the I/O Bezel
To attach the I/O bezel to Mobile Board, see Figure 11 and follow these steps:
1. Observe the precautions in "Before You Begin" on page 35.
2. Slide the I/O bezel (Figure 11, A) onto the edge of the Mobile Board as shown in
the figure.
3. Install the hex standoffs (Figure 11, B) on the DVI-I connector.
Figure 11. Attaching the I/O Bezel