Intel Raptor AT manual Address 110h Closed Open 310h, Ethernet Selection Enabled Disabled

Chapter 1: Pre-Configuration

Table 1-7 Watchdog Address Selection

Watchdog	JP6	JP6
Address	1-2	2-3
110h*	Closed	Open
310h	Open	Closed

* Manufacturer's Settings.

On-board Ethernet

The Raptor AT has a built-in 10/100 Ethernet. The jumper JP12 either disables (2-3) or enables (1-2) this feature. For more information please refer to Appendix E.

Table 1-8 Ethernet Selection

Ethernet Selection

Enabled

Disabled

JP12

1-2*

2-3

* Manufacturer's Settings.

ATX Power Supply Enhancements

The Raptor AT has a Power on mode selection. The jumper JP4 selects the power on mode.

Table 1-9 POWER ON Mode Select

Power on	Power on	Power on upon
		PWR_SW signal
mode	immediately
		(Button press)
JP4	1-2*	2-3

* Manufacturer's Settings.

7