Intel Raptor AT manual Try Other Boot Devices, Initial Display Mode, Floppy Access Control

Raptor AT – Installation Guide

1st Boot Device 2nd Boot Device 3rd Boot Device 4th Boot Device

These options set the drive boot sequence that Raptor AT attempts to boot from after AMIBIOS POST completes. The settings are Disabled, 1st IDE, 2nd IDE, 3rd IDE, 4th IDE, Floppy, ARMD-FDD, ARMD-HDD, ATAPI-CDROM, SCSI, Network and I2O. The default is:

1st Boot Device - Floppy

2nd Boot Device - 1st IDE-HDD 3rd Boot Device - ATAPI-CDROM 4th Boot Device - Disabled

Try Other Boot Devices

Set this option to Yes (default) to instruct AMIBIOS to attempt to boot from any other drive in the system if it cannot find a boot drive among the drives specified in the 1st, 2nd, 3rd and 4th Boot Device options.

Initial Display Mode

Set this option to BIOS (default) to obtain the normal boot-up screen. Set to Silent to obtain the customized graphic boot-up screen.

Floppy Access Control

This option selects usage right from the floppy drive. The setting is either Read/Write (default) or Read-Only.

Hard Disk Access Control

This option selects usage right from the hard disk. The setting is either Read/Write (default) or Read-Only.

18