Intel Raptor AT manual CPU Support, Supported Bus Clocks, Memory, On-Board I/O

Introduction

Warranty

This product is warranted against material and manufacturing defects for two years from the date of delivery. Buyer agrees that if this product proves defective the manufacturer is only obligated to repair, replace or refund the purchase price of this product at manufacturer's discretion. The warranty is void if the product has been subjected to alteration, misuse or abuse; if any repairs have been attempted by anyone other than the manufacturer; or if failure is caused by accident, acts of God, or other causes beyond the manufacturer's control.

Raptor AT - An Overview

The Raptor AT represents the ultimate in industrial embedded motherboard technology. No other system board available today provides such impressive list of features:

CPU Support

•Supports full series of Intel Celeron and PIII PGA370 processors (up to 100MHz FSB).

Supported Bus Clocks

•66 and 100MHz.

Memory

•Three DIMM sockets up to 384MB or 768MB(registered) SDRAM, PC100 recommended (required for PIII or 100MHz).

On-Board I/O

•2 Floppies up to 2.88 MB.

•Dual channel PCI 32-bit EIDE controller.

•Two high speed RS-232 serial ports 16 Bytes FIFO (16550).

•One Centronics™ compatible bidirectional parallel port. EPP/ECP mode compatible.

VII