
Raptor AT – Installation Guide
The system BIOS passes control to different buses at the following checkpoints:
High Byte The high byte of these checkpoints includes the following information:
Bits |
|
|
|
| Description | |
| 0000 | Function | 0. | Disable all devices on the bus. | ||
| 0001 | Function | 1. | Initialize static devices on the bus. | ||
| 0010 | Function | 2. | Initialize output devices on the bus. | ||
Bits | 0011 | Function | 3. | Initialize input devices on the bus. | ||
0100 | Function | 4. | Initialize IPL devices on the bus. | |||
| ||||||
| 0101 | Function | 5. | Initiate general devices on the bus. | ||
| 0110 | Function | 6. | Initialize error reporting on the bus. | ||
| 0111 | Function | 7. | Initialize | ||
| Specify the bus |
| ||||
| 0 | Generic DIM Device Initialization Manager. | ||||
Bits | 1 | Onboard System devices. | ||||
2 | ISA devices. |
|
| |||
|
|
| ||||
| 3 | EISA devices. |
| |||
| 4 | ISA PnP devices. | ||||
| 5 | PCI devices. |
|
|
Table
Except for beep code #8, these codes are always fatal.
1 beep | Refresh failure. |
2 beeps | Parity error. |
3 beeps | Base 64K memory failure. |
4 beeps | Timer not operational. |
5 beeps | Processor error. |
6 beeps | 8042 - gate A20 failure. |
7 beeps | Processor exception interrupt error. |
8 beeps | Display memory read/write failure. |
9 beeps | ROM checksum error. |
10 beeps | CMOS shutdown register read/write error. |
11 beeps | Cache memory bad. |
66