Intel Raptor AT manual Address, Post Code Display

Raptor AT – Installation Guide

Table D-1 Watchdog Timer Selection

Watchdog	JP10	JP10		JP10
Type	1-2	3-4		5-6
Hardware	Closed	Open		Open
Disabled*	Open	Closed		Open
Software	Open	Open		Closed
* Manufacturer's Settings.
Table D-2 Watchdog Time-out Selection
Watchdog	JP8	JP8		JP8
Timeout	1-2	2-3		3-4
1200 ms*	Closed	Open		Open
600 ms	Open	Closed		Open
150 ms	Open	Open		Closed
* Manufacturer's Settings.
Table D-3 Watchdog Address Selection
Watchdog	JP6			JP6
Address	1-2		2-3
110h*	Closed			Open
310h	Open		Closed

* Manufacturer's Settings.

Post Code Display

The POST code display is a device implemented on the Raptor AT to help on failure diagnostics. A POST code is transmitted by the BIOS during the POST (Power On Self Test). It is a number that refers to the state or test condition of a circuit or group of circuits. Knowing the results of these tests (hence the POST code) can be very important in debugging a system.

56