JVC BD-X200E manual Settings & Controls for Recording, DVD Recording, Pre-Recording Settings

Settings & Controls for Recording

DVD Recording

DVD recording is carried out using the following procedure.

	Pre-Recording Settings
Preparation of the DVD-R or DVD-	● Insert a new DVD-R or DVD-RW (video mode), or alternatively, a similar disc that has
RW (video mode only).	been recorded on using the DVD recorder.
	● If the recording on a DVD-RW is to be performed once again from the beginning, erase
	the disc’s data using ERASE from the DISC MENU screen. (☞ Page 31)
On-screen settings	Use the setting screens to select the appropriate recording signal, setup the recording
	conditions, and make other necessary settings. (☞ Page 32)
Adjustment of audio recording levels.	Audio recording levels can be adjusted in one of two different ways. (☞ Page 36)
Selection of styles for the title and	The title and chapter menus are used during playback of a disc to select the section of
chapter menus	the disc to be viewed. A total of five different display styles have been made available for
	these menus, and these can be selected using the PRESET STYLE MENU screen. In
	addition, the DVD recorder also allows you to freely modify these display styles.
	(☞ Page 39)
	Recording Operations (☞ Page 40)

English

Start of
recording		Chapter 1
			(chapter mark)
		Chapter 2
	Title 1
		Chapter 3
		Chapter 4
End of
recording	(Title closing)
Start of
recording		Chapter 1
	Title 2
		Chapter 2
End of
recording	(Title closing)
Start of
recording
	Title 3
End of
recording	(Title closing)

●The section between the start of recording using the REC and PLAY buttons and the end of recording using the STOP button constitutes a single recording title, and each title is assigned a unique number.

A single disc can contain up to 99 different titles.

●Each title can be separated into a number of different chapters by inserting chapter marks at the appropriate points. Unique numbers are also assigned to chapters, and a single title can contain up to 99 different chapters.

●Adding chapters

A chapter mark is inserted automatically whenever recording is paused.

In addition, CHAPTER CREATION from the RECORDER MENU (1/2) screen can also be used to setup the automatic or manual insertion of chapter marks.

●Thumbnails (i.e., the frame at the start of recording) and backgrounds are automatically created for the title and chapter menus using the style selected using PRESET STYLE.

If EDIT MENU from the SYSTEM MENU screen is set to ENABLE before the start of recording, it will be possible to modify the chapter menu’s style and thumbnails and to insert chapter names and comments whenever recording is stopped (i.e., whenever title closing is performed).

●Once title closing has been carried out, it will not be possible to modify the chapter menu.

●The REC CONTROL panel can be used to perform recording operations with a keyboard and mouse. (REC CONTROL from the REMOTE MENU screen must be set to ON.)

●If EDIT MENU from the SYSTEM MENU screen is set to ENABLE, it will be possible to modify the title menu’s style and to input title names when the disc is being finalized.

Processing After Recording (☞ Page 44)

If additional recording is to be performed:

Press the OPEN/CLOSE button and remove the disc.

If the disc is to be played on this DVD recorder or on a different DVD player: Finalize the disc.

To do this, select FINALIZE from the DISC MENU screen.

*When a disc has been finalized, it will not be possible to record more content to it or to modify its menu styles.

E-29