
Using a Keyboard & Mouse to Control Recording
| VIDEO | 8dB | AUDIO | Signal Connections |
| IN LINE OUT | INPUT | CH1 |
|
|
| LEVEL | IN OUT |
|
|
| 4dB |
|
|
| Y/C |
|
|
|
| IN |
|
| Connect a keyboard and mouse to the USB terminals on the back of the DVD |
| DV IN/OUT |
| CH2 | |
|
| REMOTE | recorder. | |
LAN | SIGNAL | USB | DC 19V | |
| GND |
|
|
English
! | ” | # |
| $ | % | & |
| ' | ( | ) | ~ = |
|
| / | * | - | |
1 | 2 | 3 |
| 4 | 5 | 6 |
| 7 | 8 | 9 | 0 | - | ^ | ¥ | |||
| Q | W E |
| R |
| T | Y | U | I | O |
| P |
| 7 | 8 | 9 |
|
|
|
|
|
|
|
|
|
|
|
|
|
| @ |
|
|
| + |
| A | S | D | F |
| G |
| H | J | K | L |
|
| 4 | 5 | 6 |
|
|
|
|
|
|
|
|
|
|
|
|
| ; | : |
|
|
|
|
| Z | X |
| C | V | B |
| N | M | < 、 > 。 ? ・ _ | 1 | 2 |
|
| |||
|
|
|
|
|
|
|
|
|
| , |
| . | / |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| 0 |
| . |
|
REMOTE MENU screen
| REMOTE MENU |
|
| |
|
|
|
|
|
| MENU |
|
|
|
| REMOTE SELECT |
| OFF | |
| REC CONTROL |
| ON | |
| REM FF/REW MODE |
| FF/REW |
000 min
FINALIZE
DISC TITLE
| REC |
04/05/04 | TITLE 1 0:11:22 |
11:20:00 | CHAPTER 1 0:11:22 |
REC CONTROL panel
Notes
●DISC TITLE from the REC CONTROL panel can be selected to allow a name to be input for the disc. This type of name proves useful when managing discs using a PC. Note that disc names are not displayed on the monitor or the DVD recorder.
Characters allowed for the disc title are alphanumerical characters and underscore (_) only. Space and other symbols may not be used.
●FINALIZE and DISC TITLE from the REC CONTROL panel cannot be used while recording.
●The Record (r) button from the REC CONTROL panel can be activated or clicked to insert chapter marks and thumbnails during recording.
Settings
●If the REC CONTROL panel is to be displayed
This panel will be displayed in Stop, Recording, and Recording Pause mode.
To open the Setup Menu, press the DVD recorder’s SET UP button. Or, either press the ESC key on the keyboard or right click the mouse, and the set up menu will be displayed.
Procedure
1.Start recording.
Keyboard : Use the arrow keys (©, †, ∞, and √) to select Record (r) from the REC CONTROL panel, and then press the Enter key.
Mouse | : Move the mouse pointer to the Record (r) button and left click |
| while the Record button selected. |
2.Pause recording.
Keyboard : Use the arrow keys (©, †, ∞, and √) to select Pause (w) from the REC CONTROL panel, and then press the Enter key.
Mouse | : Move the mouse pointer to the Pause (w) button and left click |
| while the Pause button is selected. |
●The DVD recorder will adopt Recording Pause mode; in addition, a chapter mark and thumbnail will be inserted at the current position.
3.Restart recording.
Keyboard : Use the arrow keys (©, †, ∞, and √) to select either Record (r) or Pause (w) from the REC CONTROL panel, and then press the Enter key.
Mouse : Move the mouse pointer to the Record (r) or Pause (w) button and left click while the Record or Pause button is selected.
Steps 2 and 3 can be repeated to create a single, partitioned title.
4.End recording (i.e., close the title)
Select Stop (q) from the REC CONTROL panel and press the Enter key.
●The action of the DVD recorder following the end of recording depends on the setting of EDIT MENU from the SYSTEM MENU screen.
DISABLE : Recording is ended and the chapter menu is created using standard settings (i.e., the title is closed).
ENABLE : The THUMBNAIL EDIT screen will appear. This screen can be used to modify the chapter menu’s display style, to change the thumbnails used, to input chapter names, and to perform other similar functions. For more details, refer to page 49.
If additional recording is to be carried out, repeat steps 1 through 4 above.
●In such a case, each subsequent recording will be stored as a new title.
5.End recording and remove the disc.
Depending on how the disc will be used, one of two different procedures is implemented at this time.
●If more content will be recorded to the disc using this DVD recorder: Simply press the DVD recorder’s OPEN/CLOSE button and remove the disc. (Do not finalize the disc before it is removed.)
●If the disc is to be played on a different DVD player:
Use FINALIZE from the REC CONTROL panel to finalize the disc before it is ejected.
For more details regarding finalizing, refer to page 44.