JVC BD-X200E Starting to record, Saving event data, Finishing recording,  To suspend recording

Synchronous Recording

Editing Operations on the REMOTE CONTROL (9PIN MASTER/DV MASTER) Screen (continued)

4. Starting to record

REMOTE CONTROL SCREEN

( 9PIN MASTER )

EXIT

1

No.

IN

OUT

ACTION

MENU

01  01

00: 00: 00: 00

: : :

CHAPTER



2

01  02

00: 01: 30: 00

: : :

CHAPTER



3

01  03

00: 02: 30: 00

00 : 03: 30: 00

STOP

00

CHAPTER

MANUAL

TOTAL

DURATION

00h 03m 30s

ADJ

BITRATE

8.0 Mbps

DISC

REMAIN

030 min

TC SET

EDL

FINALIZE

TC CANCEL

EDIT/END

SOURCE TIMECODE 00: 03: 30: 00

RECORDING

EDIT/END item

To suspend recording

While recording, press the “SPACE” key on the keyboard, or select the EDIT/END item on the screen, then press the “Enter” key and the recording will be suspended.

Notes

●IN point editing accuracy is ± 5 frames. OUT point and chapter point editing accuracy is ± 20 frames.

●In the chapter auto mode, chapters are created at fixed time intervals.

qPress the “SPACE” key on the keyboard, or select the EDIT/END item on the screen, then press the “Enter” key.

●The VCR goes to a position about 5 seconds before the edit start position and starts playback.

●At the same time as the VCR reaches the edit start position this machine will start recording.

While recording, “RECORDING” is displayed.

●When the position where a chapter is registered is reached a chapter mark will be applied.

●The event that is being executed will be displayed at the “>” mark on the left.

wWhen the event OUT point is reached, the following is carried out, depending upon the ACTION item setting for the event.

When the OUT point of an event for which the ACTION item is set to PAUSE is reached, the following operations are carried out.

●This machine enters the recording pause state.

●The VCR goes to a position about 5 seconds before the next start edit point, and starts to playback.

●At the same time that the VCR reaches the edit start point this machine starts recording.

When the ACTION item for the final event is set to PAUSE, editing finishes when the OUT point of the final event is reached, and the following operations are carried out.

●The VCR automatically stops.

●This machine automatically stops, and the chapter menu thumbnail edit screen is displayed. (When the DVD MENU TYPE item of the

RECORDER (2/2) screen is set to TOP+MENU, and the EDIT MENU item of the SYSTEM menu screen is set to ENABLE)

When the OUT point of an event for which the ACTION item is set to STOP is reached, editing finished and the following operations are carried out.

●The VCR automatically stops.

●This machine automatically stops, and the title close process is executed. (The thumbnail edit screen is not displayed.)

5. Saving event data

			REMOTE CONTROL SCREEN					( 9PIN MASTER )
EXIT
1	No.			IN			OUT		ACTION		MENU
	01  01			00: 00: 00: 00		: : :			CHAPTER		
2	01  02			00: 01: 30: 00		: : :			CHAPTER		
3	01  03			00: 02: 30: 00		00 : 03: 30: 00			STOP		00
			CHAPTER		MANUAL		TOTAL	DURATION		00h 03m 30s
ADJ		BITRATE			8.0 Mbps		DISC	REMAIN		030 min
TC SET					EDL					FINALIZE
TC CANCEL					EDIT/END
							SOURCE TIMECODE 00: 03: 30: 00

EDL item

Event data can be saved as an edit list (EDL) on the EDL MANAGER screen of this machine.

Also, an edit list registered on the EDL manager screen can be read into the event register list of the REMOTE CONTROL screen.

Select the EDL item on the screen, press the “Enter” key and the EDL MANAGER screen will be displayed.

☞Page 69 for details on how to use the EDL MANAGER screen.

6. Finishing recording

			REMOTE CONTROL SCREEN					( 9PIN MASTER )
EXIT
1	No.			IN			OUT		ACTION		MENU
	01  01			00: 00: 00: 00			: : :		CHAPTER		
2	01  02			00: 01: 30: 00			: : :		CHAPTER		
3	01  03			00: 02: 30: 00			00 : 03: 30: 00		STOP		00
			CHAPTER			MANUAL	TOTAL	DURATION		00h 03m 30s
ADJ		BITRATE				8.0 Mbps	DISC	REMAIN		030 min
TC SET						EDL				FINALIZE
TC CANCEL					EDIT/END
							SOURCE TIMECODE 00: 03: 30: 00

To playback the recorded disc on another DVD player, select the FINALIZE item, and press the “Enter” key.

Select the EXIT item on the screen, press the “Enter” key, and the REMOTE CONTROL screen will disappear.

To remove a disc from this machine, press the OPEN/CLOSE button on this machine.

EXIT item FINALIZE item

E-68