JVC BD-X200E manual Remote Menu Screen

	Parameter	Possible settings				Description
INTRODUCTION			[OFF]		Select whether to create an introduction title (opening movie) in a completed disc
TITLE				ON	(finalized disc). This is set before inserting a disc or when a blank disc is inserted. If
					recorded with this item set to ON, title 1 will be recorded as the introduction title.
INTRo			[oFF]		OFF	: Do not create an introduction title.
				oN	ON	: An introduction title is created when finalizing.
					* If this item is set to ON, a disc with only title 1 recorded cannot be finalized.
BACK					This button is used to return to the RECORDER MENU (1/2) screen.
bACK

REMOTE MENU Screen

The following table identifies and describes the parameters that may be set using the REMOTE MENU screen.

Top half

: Appearance on monitor screen

Bottom half

: Appearance on LCD display

[ ]

: Default setting

Parameter

Possible settings

Description

REMOTE SELECT

[OFF]

This parameter is used to select a method for controlling external devices connected

9PIN(MASTER)

via the RS-422A REMOTE terminal or the DV IN/OUT terminal).

9PIN(PLAY)

OFF

: Control is not to be carried out via the RS-422A REMOTE terminal

9PIN(REC)

or the DV IN/OUT terminal. This is the standard setting for normal

DV(MASTER)

operation.

DV(SLAVE)

9PIN(MASTER): This setting is made when recording audio and video from a VCR

DV(TRIGGER)

connected to the RS-422A REMOTE terminal. When selected,

the REMOTE CONTROL (9PIN MASTER) screen appears, and

9PIN (PLAY)

this screen can be used to carry out recording operations.

: Use this setting to use this machine as a player under RS-422

9PIN (REC)

control.

: Use this setting to record images and sound from a non-linear

REMoTE

[oFF]

editor. The REMOTE CONTROL (9PIN REC) screen is displayed.

9PNM

This machine becomes the slave side, controlled by the non-linear

9PNP

DV(MASTER)

editor.

9PNR

: This setting is made when recording audio and video from a DV

dVM

camera or video connected to the DV IN/OUT terminal.

dVS

When selected, the REMOTE CONTROL (DV MASTER) screen

dVT

appears, and this screen can be used to carry out recording

operations.

DV(SLAVE) : This setting is made when recording audio and video from a

nonlinear editor connected to the DV IN/OUT terminal. When

selected, the REMOTE CONTROL (DV SLAVE) screen appears.

In addition, the BD-X200 will become the slave device and will be

DV(TRIGGER)

controlled by the non-linear editor.

: This setting is made when the BD-X200 is connected to a DV

camera featuring a DV record triggering function, and it allows

this DVD recorder to record video from the camera in response to

Note

operation of its trigger button.

When setting this item to 9PIN (MASTER), DV (MASTER), 9PIN (REC) or DV

(SLAVE), the video output image becomes the REMOTE CONTROL screen display.

However, video input can be checked by press and holding the REC button while

DVD Recorder is stopped and viewing the encode output.

REC CONTROL

[OFF]

This parameter is used to indicate whether or not the REC CONTROL panel is to be

ON

displayed on the monitor screen.

ON : The REC CONTROL panel is to be displayed only when a recordable disc

REC

[oFF]

has been inserted and the DVD recorder is in Stop, Recording, or Recording

oN

Pause mode.

OFF : The REC CONTROL panel not to be displayed.

REM FF/REW

[FF/REW]

This parameter is used to select the command output via the RS-422A REMOTE

MODE

SEARCH

terminal or DV terminal when the FF or REW button is pressed on the REMOTE

CONTROL (9PIN MASTER/DV MASTER) screen.

SEARCH

[F R]

FF/REW : A FF or REW command is to be output accordingly.

SEA

SEARCH : Aforward-search or reverse-search command is to be output accordingly.

MENU

This button is used to return to the Setup Menu screen.

English

E-91