JVC BD-X200E manual DVD Dubbing, Network Settings

DVD Dubbing

Dubbing DVDs Using the LAN Terminal (continued)

Network Settings

Use the following procedure to carry out network settings on both the sender and receiver devices.

	BUSY		Cursor buttons
	OPEN/CLOSE
			(6, 7, t and 8)
	OPTION DV	Y/C LINE
		SET UP
			SET UP button
TOP	SET
MENU MENU
			SET button
	NETWORK MENU Screen
	NETWORK MENU
	MENU
	HOST NAME			bdx200
	IP ADDRESS SETTING			STATIC
	IP ADDRESS			192.168.0.2
	SUBNET MASK			255..255.255.0
	DEFAULT GATEWAY			192.168.0.254
	MAC ADDRESS		99.99.99.99.99
		IP ADDRESS
		192:168:000:002
	192	168	000 002	SET

Setting example:

This value is different for each device.

1.Press the SET UP button to display the Setup Menu.

2.Select NETWORK from the Setup Menu and then press the SET button.

● The NETWORK MENU screen will appear.

3.Use the following parameters from the NETWORK MENU screen to make settings required for dubbing.

Select the item and press the SET button, and the setting screen for each item will be displayed.

 HOST NAME

Use the 6 and 7 cursor buttons or the ∞ and √ arrow keys to select this parameter, and then input the BD-X200’s network name using the USB keyboard.

(Names may be up to 20 characters in length.)

 IP ADDRESS, SUBNET MASK, and DEFAULT GATEWAY

Refer to the following table for more details regarding these parameters.

qSelect the required parameter using the 6 and 7 cursor buttons or the ∞ and √ arrow keys.

wSelect the digit to be set using the t and 8 cursor buttons or the † and © arrow keys.

eChange the selected digit using the 6 and 7 cursor buttons or the ∞

and √ arrow keys.

●The number can be directly input from the keyboard.

rRepeat steps w through e to make all of the required settings, and then press the SET button or Enter key.

4.To return to the Setup Menu after all settings have been made, select MENU from the NETWORK screen, and then press the SET button or the ENTER key.

5.Press the SET UP button to return to the normal screen display.

IP ADDRESSS 192.168.100.xxx

SUBNET MASK 255.255.255.000

All devices are set to the same network.

Parameter	Description	Default setting
HOST NAME	The parameter is used to enter the BD-X200’s network name using a keyboard.	bdx200
	(Names may be up to 20 characters in length.)
IP ADDRESS	This parameter cannot be set and is fixed in STATIC mode.	————
SETTING
IP ADDRESS	Use this parameter to set the IP address. Make sure, however, that no two devices	192.168.000.002
	on a single network share the same IP address.
SUBNET MASK	Use this parameter to set the subnet mask. Connected BD-X200s should have the	255.255.255.000
	same network setting.
DEAULT GATEWAY	Use this parameter to set the gateway address. Connected BD-X200s should have	192.168.000.254
	the same address.

E-80