Synchronous Recording
Saving and Reading Edit Lists on the EDL MANAGER Screen (continued)
How to operate the EDL MANAGER screen and its contents
EDL MANAGER
BACK
EDL01
EDL02
EDL03
EDL04
EDL05
EDL06
EDL07
MEDL08 S EDL09 EDL10
SAVE LOAD NAME
IMPORT DELETE
EDL item
Item | Function |
|
|
BACK | Returns to the REMOTE CONTROL screen. |
|
|
EDL01 ~ EDL10 | Edit list (EDL) registration area. |
| When selected and the “Enter” key is pressed it is highlighted. |
| If a file is registered in the EDL item, the characters are blue. |
| In the front “M” is displayed for MASTER, and “S” is displayed for SLAVE. |
|
|
SAVE | When the EDL item is highlighted and this item is pressed, the current setting values of the REMOTE |
| CONTROL screen are saved. |
|
|
LOAD | When the EDL item is highlighted and this item is pressed, the selected EDL is registered on the |
| event register list of the REMOTE CONTROL screen. |
| However, only M files are valid for a REMOTE CONTROL screen for MASTER, and only S files are |
| valid for a REMOTE CONTROL screen for SLAVE. |
|
|
NAME | When the EDL item is highlighted and this item is pressed, the EDL item can be named. Up to 20 |
| ASCII characters can be used (up to 16 characters are displayed). |
|
|
IMPORT | When the EDL item is highlighted and this item is pressed, EDL imported from EasyMenu or other |
| external edit lists are registered. (☞ Page 71) |
|
|
DELETE | When the EDL item is highlighted and this item is pressed, the selected EDL item is deleted. |
|
|
About EDL
In SLAVE mode CSV files and SONY format EDL files can be used. In MASTER mode only CSV files can be used.
CSV files have the same file name for both MASTER and SLAVE modes, but the files are not compatible. Use the correct format file.
Details of the MASTER mode CSV file File name: X200.csv
In one line, IN, OUT, ACTION, MENU are written in that order, with a “,” comma in between them. The IN/OUT time code values are hour minute second frame with a “:” colon between them.
(Example)
00:00:00:00, 00:00:10:00, STOP, 1
00:00:00:00, 00:10:10:00, PAUSE, 0
00:10:20:00, | , | , |
*Always enter a line break code at the end of an event.
●For ACTION, if one of the initial characters S, P, C is entered the rest of the characters can be omitted.
●OUT, ACTION, and MENU can be omitted. In this case write a space + a comma. When ACTION is omitted, the OUT point is ineffective, so the following is done.
If the OUT point is registered → PAUSE OUT point not registered → CHAPTER
When MENU is omitted, the setting value of the CHAPTER PATTERN item of the PRESET STYLE menu screen is used. (0 display)
