Recording with the Front Panel
On a DVD, the section of video recorded between the start of recording and pressing of the STOP button to end recording is stored as a single title, and a unique title number is assigned to each of these sections. A single disc can contain up to 99 different titles. In addition, each title can be separated into a number of different chapters by inserting chapter marks at the appropriate points, and each title can contain up to 99 chapters.
Information relating to titles and chapters is stored on a disc in the form of title and chapter menus. When the disc is being played, therefore, the title and chapter menus can be used to access specific sections of stored video and audio.
|
| LCD display |
| |
|
|
|
| BUSY |
OPERATE |
|
|
| OPEN/CLOSE |
|
|
|
| OPEN/CLOSE button |
| DVD RECORDER | OPTION DV Y/C LINE | ||
|
| SET UP | ||
AUDIO | TITLE | CHAPTER |
| |
CH1 | DOLBY DIGITAL |
|
|
|
| LPCMMPEG |
|
|
|
CH2 |
|
|
|
|
PHONES | REV STOP PLAY | FWD PAUSE REC | TOP | SET |
| ||||
|
|
| MENU MENU |
|
STOP button |
| REC button |
| |
PAUSE button
English
Remaining time
Monitor display
000 min
|
| REC |
04/05/04 | TITLE 1 0:11:22 | |
11:20:00 | CHAPTER 1 0:11:22 | |
|
|
|
Title and chapter numbers
Notes
●A maximum of 10 minutes will be required to complete title closing.
●The remaining time available for recording on a disc will be displayed on the monitor. Note that this is to be used as a general guide, not as an exact figure. (DISPLAY and REMAIN from the DISPLAY MENU screen must both be ON for this figure to be displayed.)
●During the recording process, the current title number and chapter number are displayed on the monitor. (DISPLAY and TITLE/CHAPTER from the DISPLAY MENU screen must both be ON for these numbers to be displayed.)
Insert a disc that can be recorded on.
1.With the DVD recorder stopped, make all of the required settings and adjust the audio recording levels.
2.Start recording.
This is done by pressing the REC and PLAY buttons simultaneously.
3.Pause recording.
This is done by pressing the PAUSE button.
●The recording pause mode is entered.
When the AUTO CHAPTER (REC PAUSE) item of the RECORDER MENU (1/2) screen is set to ON, a chapter mark is automatically inserted when the recording pause mode is entered.
A number of different methods can also be used for the manual or automatic insertion of chapter marks. (☞ Page 42)
4.Restart recording.
Press the PLAY or PAUSE button.
●Recording will begin once again and a new chapter will be created in the current title.
5.End recording (i.e., close the title)
Press the STOP button when either recording or paused.
●The action of the DVD recorder following the end of recording depends on the setting of EDIT MENU from the SYSTEM MENU screen.
DISABLE : Recording is ended and the chapter menu is created using
preset settings (i.e., the title is closed).
ENABLE : The THUMBNAIL EDIT screen will appear. This screen can be used to modify the chapter menu’s display style, to change the thumbnails used, to input chapter names, and to perform other similar functions. For more details, refer to page 49.
If additional recording is to be carried out, repeat steps 1 through 5 above.
● In such a case, the subsequent recording is stored as a new title.
