Example 1 Loading a CSV-format EDL Slave mode | JVC BD-X200E

Registering IN/OUT/CHAPTER POINT from external edit lists

External edit lists can be read by the EDL MANAGER screen of this machine, and used as edit data in the REMOTE CONTROL screen.

Notes

●Loading of external edit lists is possible when CHAPTER CREATION from the RECORDER MENU (2/2) screen is set to

MANUAL.

●EDL that can be read in : In SLAVE mode CSV files or Sony9100 format files.

In MASTER mode CSV files only. CSV files have the same name for the MASTER or SLAVE modes, but the files are not compatible. Use the correct format files. (Refer to page 70 “Details of the MASTER mode CSV files”)

●Chapter marks are inserted at GOP intervals (i.e., 15 frames). It will not be possible to insert chapter marks that are closer together than this interval.

English

EDL item

EDL MANAGER

BACK

EDL01

EDL02

EDL03

EDL04

EDL05

EDL06

EDL07

MEDL08 S EDL09 EDL10

SAVE LOAD NAME

IMPORT DELETE

LOAD item

IMPORT item

Operation

To enter the state where edit lists can be transferred to the BD- X200.

1.Move the cursor to the EDL item you wish to register on the EDL MANAGER screen, then press the “Enter” key.

●The selected EDL item will be highlighted.

2.Move the cursor to the IMPORT item on the EDL MANAGER screen, then press the “Enter” key on the keyboard.

●The external edit list will be read into the EDL MANAGER screen.

3.To use the read edit list, select the LOAD item on the EDL MANAGER screen, and press the “Enter” key.

●The edit list is set in the REMOTE CONTROL screen.

Example 1: Loading a CSV-format EDL (Slave mode)

JVC CSV	00:00:00:00
IN POINT	00:00:00:00
OUT POINT	01:00:00:00
Chapter1	00:10:00:00
Chapter2	00:20:00:00
Chapter3	00:30:00:00
Chapter4	00:40:00:00
Chapter5	00:50:00:00

IMPORT item

●Line returns at the end of each line.

●Maximum of 98 chapter marks.

EDL MANAGER screen

EDL MANAGER

BACK

EDL01

EDL02

EDL03

EDL04

EDL05

EDL06

EDL07

MEDL08 S EDL09 EDL10

SAVE LOAD NAME

IMPORT DELETE

LOAD item

REMOTE CONTROL screen

REMOTE CONTROL SCREEN ( DV SLAVE )

EXIT

IN POINT

00:00:00:00

OUT POINT

01:10:00:00

h: m: s : f

h: m: s : f

h: m: s : f

1

00:10:00:00

2

00:20:00:00

3

00:30:00:00

4

00:40:00:00

5

00:50:00:00

6

:

:

:

7

:

: :

8

:

:

:

9

:

:

:

CHAPTER

MANUAL

ADJ

BITRATE

8.0 Mbps

DISC REMAIN

000 min

EDL

FINALIZE

TC CANCEL

Example 2: Loading a Sony9100-format (Slave mode)

Recorder-In and Recorder-Out time codes are read from the X-source and Y-source rows, and these are then set as the In Point, Out Point, and chapter marks for editing.

IN point register				CHAPTER point register

	EDIT	RECORDER-IN		RECORDER-OUT
	0001	00:00:00:00		00:10:00:00
	0002	00:10:00:00		00:20:00:00
	0002	00:20:00:00		00:20:00:00
	0003	00:30:00:00		00:40:00:00
	0004	00:40:00:00		00:50:00:00
	0004	00:40:00:00		00:50:00:00
	0005	00:50:00:00		01:00:00:00		Register in
	0005	00:50:05:00		01:00:00:00		Register in
						OUT point

Already registered			Register in		IMPORT item
Already registered			Register in

CHAPTER point

EDL MANAGER screen

EDL MANAGER

BACK

EDL01

EDL02

EDL03

EDL04

EDL05

EDL06

EDL07

MEDL08 S EDL09 EDL10

SAVE LOAD NAME

IMPORT DELETE

REMOTE CONTROL screen

REMOTE CONTROL SCREEN ( DV SLAVE )

EXIT

IN POINT

00:00:00:00

OUT POINT

01:00:00:00

h : m: s : f

h : m: s : f

h : m: s : f

1

00:10:00:00

2

00:20:00:00

3

00:30:00:00

4

00:40:00:00

5

00:50:00:00

6

00:50:05:00

7

:

: :

8

:

:

:

9

: : :

CHAPTER

MANUAL

ADJ

BITRATE

8.0 Mbps

DISC REMAIN

000 min

EDL LOAD

FINALIZE

TC CANCEL

LOAD item

E-71

Image 73

JVC BD-X200E Registering IN/OUT/CHAPTER Point from external edit lists, Example 1 Loading a CSV-format EDL Slave mode

Contents

BD-X200E Port Cable Length Supplement Important In the United Kingdom Mains Supply AC 230 V ` For Your Safety AustraliaConnection to the mains supply Not to be used in the U.K Contents Title & Chapter Menu Settings Settings & Controls for RecordingSetup Menu Recording Introduction DVD dubbing can be carried out using the LAN terminalOverview of BD-X200 Functions Precautions Regarding Condensation Precautions for DVD Recorder UseCompensation for Damaged Content Extended Periods of Inactivity Introduction Precautions for Disc UsageCare of Discs to Ensure High-Quality Playback Additional Notes on Disc Handling Storing Discs Details Regarding Discs DVD-RW video modeDiscs for Recording & Playback Finalizing DVD-R & DVD-RW Details Screen Sizes DVD Data Configuration Front Panel Component Names & Functions Component Names & Functions Button SET UP button⁄ t button ¤ SET button Rear Panel # Signal GND terminal @ DC power cord clampRS-422A Remote terminal D-sub 9-pin male LAN terminal RJ-45 LCD Display LCD Display and On-Screen ContentDescription Title number / Chapter number / Counter Display of the Setup Menu Indication of the current operating modeAlarm messages Event messages On-Screen Content LCD Display and On-Screen ContentStatus Messages Display Menu screen Date OFFTime DVD-R Disc StatusDVD-RW DVD Event Messages Alarm Messages Audio and video signals Signal ConnectionsPreparation Preparation Control signals Connect the AC adaptor included to the DVD recorder Power Connections Turning the Power On Turning the Power Off Turning the Power On & OffPress the Operate button Inserting a Disc Inserting & Removing DiscsRemoving a Disc Procedure Using a Keyboard & Mouse Connections Setting the Date and Time Setting & Displaying the Date & TimeSet the date and time as required Return to the normal screen display Displaying the Date and Time Mode Displayed informationTo display date and time information on-screen Display Menu Screen Makeup Pre-Recording Settings Settings & Controls for RecordingDVD Recording Recording Operations Preparing a Disc for Recording Settings & Controls for RecordingDisc condition Recording operations Erasing All Data From a DVD-RW Disc Canceling the Finalization of a DVD-RW Pre-Recording Settings Operation Finish the SettingDisplay the Recorder Menu 1/2 screen Display the Recorder Menu 2/2 screen Selecting Input Signals Selecting & Confirming Input SignalsConfirming Input Signals Complete the setting process Setting Encoding Formats Setting the Encoding Format for Audio & VideoMake the required settings on the Recorder Menu 1/2 Screen Video Encoding Guide to Recording Times Audio EncodingAUDIO Encode Dolby Digital Selecting the Adjustment Method Adjusting of Audio Recording LevelsAdjusting the Audio Recording Levels Open the Recorder Menu 2/2 screen Procedure Signal ConnectionsChecking the Video Input OUT terminal on the rear panel Setup Menu Confirm the settings for the currently selected styleSelecting Styles for Title & Chapter Menu Recording EnableRecording Sequence Pause recording Recording with the Front PanelRestart recording End recording i.e., close the title Inserting Chapter Marks Manually or Automatically RecordingEnd recording and remove the disc Settings Using a Keyboard & Mouse to Control RecordingProcedure Start recording If using the REC Control panel If using the Setup MenuSetup Procedure Insert the disc to be finalized Finalizing for Playback on Other DVD Players BD-X200 Title & Chapter Menus Title & Chapter Menu SettingsDisplay Styles Modifying Chapter Menus Selecting and Changing Styles for Title & Chapter Menus Title & Chapter Menu SettingsConfirming or Selecting a Style Typical Title Menu Selecting Display Styles Open the Preset Style Menu screenTitle Pattern screen Title Pattern screen will appear To end settings in the Preset Style Menu screen Ending Settings in the Preset Style Menu Screen To end menu settings Easymenu Freeware for Editing Menu Templates Changing Chapter Menus Thumbnail Edit Screen Set Edit Menu from the System Menu screen to EnableOpening the Thumbnail Edit screen Thumbnail Edit screen Changing thumbnails Changing & Naming Thumbnails for Chapter MenusChecking thumbnails Edit screen, and then press the Enter key Entering Names and Comments for Chapter MenusKey Enter a name or comment into the text box Changing the Display Style Changing & Checking Chapter Menu StylesTo change the display Pattern Chapter Menu Edit screen will appear Checking the Chapter Menu Screen Importing a template using EasyMenuConfirm that the other pages are as required Complete the preview process Confirmation window will appear Ending the Editing of Chapter Menus Changing & Checking Title Menu Styles & Names Setup MenuOpening the Title Menu Edit screen Title Menu Preview screen Checking the Title Menu ScreenTitle Menu Edit screen will appear Entering Names for the Title Menu Names and comments are entered using a keyboardPress the Enter key Select YES and then press the SET button Finalizing DiscsConfirmation screen Playing Back a Disc before Finalizing Playback Playing Back a Finalized Disc Playback Playing the Previous or Next Chapter Fast & Slow PlaybackPlaying the Previous or Next Titles Disc set with no menu Setup Procedures Recording Playback Signals from a VCR with RS-422ASynchronous Recording DV camera or VCR Enable control via DV Recording Playback Signals From a DV Camera or VCR Synchronous Recording Contents of the Remote Control 9PIN MASTER/DV Master screen Changing the monitor screen to the EE screen Controlling the VCR playback operationsKeyboard shortcut operations Entering the time code directly from the keyboard Registering eventsThumbnail edit screen is not displayed Canceling 1 event Changing and canceling events Canceling all events Changing the registered time code value Saving event data Starting to recordFinishing recording To suspend recording Saving and Reading Edit Lists on the EDL Manager Screen How to operate the EDL Manager screen and its contents Function About EDL Example 2 Loading a Sony9100-format Slave mode Example 1 Loading a CSV-format EDL Slave modeRegistering IN/OUT/CHAPTER Point from external edit lists Manual EDL Finalize TC Cancel Connection SettingInsert a recordable disc into this machine Contents of the Remote Control 9PIN REC/DV Slave Screen Registering the In Point, Out Point, and Chapter Marks Setting the Optimum Bit RateDeleting the In Point, Out Point, and Chapter Marks Saving an edit list Starting the Record ProcessEnding the Record Process Video OUT Audio OUT Recording Operations Using a DV Camera Trigger Operation Using This Machine as a Player with RS-422 ControlThis machine can be used as a Player with RS-422 control Player Recorder Signal Connections Dubbing DVDs Using the LAN TerminalDVD Dubbing Direct connection of two BD-X200s DVD Dubbing Network Settings Sender and receiver devices DubbingReceiver device Sender device To cancel dubbingDubbing proceeds to completion Confirmation box for the start of dubbing Setup Menu Configuration Setup MenuSetup Top Menu Setting the Setup Menu Setup MenuOpen the Setup Menu screen Make the required settings in the setup menu Setup Menus Input Select Menu Screen Disc Menu Screen System Menu Screen Recorder Menu Screen Preset Style Menu ScreenRecorder Menu 1/2 screen SET Interval Contents TimeInterv Auto Chapter OFF REC Pause Recorder Menu 2/2 screen Remote Menu Screen Display Menu Screen DVD † DVD Cancel Clock Adjust Menu ScreenDubbing Screen Time Menu Others TroubleshootingNetwork Menu Screen Specifications