JVC BD-X200E manual Recorder Menu 2/2 screen

Setup Menu

RECORDER MENU Screen (continued)

RECORDER MENU (2/2) screen

Parameter

Possible settings

Description

Y/C TERMINAL

S1

This parameter is used to set the specification for the DVD recorder’s VIDEO Y/C

MODE

[S2]

INPUT terminal in order to enable the recording of wide-screen discrimination signals.

S1 : S1 terminal mode is to be adopted. A discrimination signal for normal video

with a 4:3 aspect ratio and squeezed video is to be recorded.

S2 : S2 terminal mode is to be adopted. A discrimination signal for normal video

with a 4:3 aspect ratio, squeezed video, and letterbox video is to be recorded.

Y C TM

S1

[S2]

Squeezed video : 16:9 wide-screen content with the left and right sides

compressed for normal aspect screens.

Letterbox video : Content with the top and bottom of the screen blackened out.

THUMBNAIL

[NORMAL]

Thumbnail creation method for chapter and title menus during wide-signal recording

FORM

V-CUT

is selected.

H-CUT

NORMAL : The input signal is to be converted into thumbnails without modification.

V+H CUT

If the input video has an aspect ratio of 4:3, the corresponding thumbnails

are also to have this aspect ratio.

V-CUT : In this case, the top and bottom of the video content is to be removed to

THUMb

[NoR]

form thumbnails.

VCUT

H-CUT

: In this case, the left and right of the video content is to be removed to

HCUT

form thumbnails. (SQUEEZE)

V+H

V+H CUT : In this case, the top, bottom, left, and right of the video content is to be

removed to form thumbnails. (LETTER BOX)

AUDIO

[1,2ch † 1,2ch]

This parameter is to be set when recording an audio signal from the DV IN/OUT

CHANNEL (DV)

3,4ch † 1,2ch

terminal.

Specifically, it indicates whether the signals from channels 1 and 2 or from channels

dV CH

[1 2]

3 and 4 are to be recorded. (Only available for 32 kHz)

3 4

1,2ch † 1,2ch : Channels 1 and 2 are to be recorded.

3,4ch † 3,4ch : Channels 3 and 4 are to be recorded.

AUDIO REC VOLUME

[BOTH]

This parameter is used to select the method for adjustment of audio recording levels.

MODE

INDEPENDENCE

Specifically, both channels can be adjusted while maintaining the same level, or

each channel can be adjusted independently.

VRModE

[boTH]

BOTH

: Both channels are to be adjusted while maintaining the same

INdE

level.

INDEPENDENCE : Both channels are to be adjusted independently.

DISC IN ACTION

[MENU]

Select the action when a completed disc (finalized disc) is inserted into this machine

TITLE

or a DVD player.

This is set before inserting a disc or when a blank disc is inserted.

dISCIN

[MENU]

MENU : Displays the TOP MENU (title menu)

TITL

TITLE

: Starts to playback TITLE1

TITLE END

[MENU]

Select the action to be taken when playback within a title of a completed disc (finalized

REPEAT

disc) is finished. This is set before inserting a disc or when a blank disc is inserted.

STOP

MENU

: Display the TOP MENU (title menu)

NEXT TITLE

REPEAT : Repeat playback within a title.

STOP : Enter stop mode. The TOP MENU is not displayed.

TI ENd

[MENU]

NEXT TITLE : Start to playback the next title. In the case of playback of the final title,

REPT

start to playback the first title.

SToP

NEXT

DVD MENU

[TOP+MENU]

Select whether to create a TOP MENU or MENU in a completed disc (finalized disc).

TYPE

TOP

This is set before inserting a disc or when a blank disc is inserted.

NONE

TOP+MENU: When finalizing a TOP MENU is created.

When closing a title a MENU is created.

MENU T

[T+M]

TOP

: When finalizing a TOP MENU is created.

ToP

When closing a title a MENU is not created.

NoNE

NONE

: Neither a TOP MENU nor a MENU is created. The disc will be without a menu.

E-90