Masterpage:Right+
EN 21
Filename [M100_05Name.fm]
INITIAL SETTINGS
You can select the monitor type depending on the TV used when
you play back DVDVIDEO discs recorded for wide-screen TVs.
1Press SET UP to access the Main Menu screen.
2Press selection keys to
select AFUNCTION SET
UPB, then press ENTER.
3Press selection keys to
select AVIDEO IN/OUTB,
then press ENTER.
4Press selection keys to
select AMONITOR
TYPEB, then press
ENTER.
5Press selection keys to
select the desired
setting, then press
ENTER.
6Press SET UP to
complete the setting.
*The boldface settings in the table below indicate the settings at your
purchase.

8MONITOR TYPE ^ 4:3LB / 4:3PS / 16:9AUTO / 16:9FIX

4:3LB (Letter Box conversion):
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars appear
on the top and the bottom of the screen.
4:3PS (Pan&Scan):
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars do not
appear; however, the left and right edges of the pictures will not
be shown on the screen.
16:9AUTO (Wide television conversion):
Select this when the aspect ratio of your TV is 16:9 (wide TV).
16:9FIX (Wide television conversion):
Select this when the aspect ratio of your TV is fixed to 16:9
(wide TV). The unit automatically adjusts the screen width of
the output signal correctly when playing back a picture whose
aspect ratio is 4:3.
Pan&Scan/Letter Box
In general, DVD VIDEO disc are produced for a wide-screen TV
with 16:9 aspect ratio.
Material with this ratio will not fit to a TV with 4:3 aspect ratio.There
are two styles to display the image, “Pan&Scan” (PS) and “Letter
Box” (LB).
Pan&Scan
The right and left side of the image are cut off.
The image fills the screen.
The picture will be shown in the A4:3LBB
mode depending on the disc even if the
A4:3PSB is selected.
Letter Box
Black bands appear at the top and bottom of
the image. The image itself appears in 16:9
aspect ratio.
Monitor Set
Turn on the unit.
Turn on the TV and select an input mode such as EXT1.
Selection Keys (FGDE)
ENTER
SET UP
DVD SET UP
MONITOR TYPE
FUNCTION SET UP
INITIAL SET UP
FRONT AUX F-1
VIDEO IN/OUT
4:3LB
VIDEO
REAR AUX L-1
RECORDING SET
DISPLAY SET OTHERS
VIDEO
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
OK
SELECT
EXIT
SET UP
4:3LB
VIDEO
VIDEO
4:3LB
16:9FIX
4:3PS
MONITOR TYPE
FRONT AUX F-1
VIDEO IN/OUT
REAR AUX L-1
RECORDING SET
DISPLAY SET OTHERS
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
OK
SELECT
EXIT
SET UP
DVD SET UP
FUNCTION SET UP
INITIAL SET UP
16:9AUTO
M100_00.book Page 21 Friday, February 18, 2005 6:23 PM