Filename [M100_06DVD Operation.fm]
Masterpage:Left+
24 EN BASIC OPERATIONS ON DVD DECKSlow Motion1Press W to pause during playback.
2Press SLOW– (O), then press SLOW + (N).
●Each press of SLOW– (O) or SLOW + (N) increases the
slow motion speed for each direction.
●Slow motion for reverse direction cannot be performed with
Video CD/SVCD discs.
OR
Press and hold S or T for 2 or more seconds.
●Releasing the button resumes normal playback.
Skip SearchPress v during playback.
●Each press initiates an approximately 30second period of fast-
motion playback. Normal playback resumes automatically.
●This function is not possible when playing back a Video CD using
the PBC function.
One Touch ReplayYou can move back the playback position slightly.
Press w.
●Each press skips back for approximately 7seconds and resumes
playback.
●Pressing while paused skips back for approximately 7seconds
and resumes pause.
●This function is not possible when playing back a Video CD using
the PBC function.
Resume FunctionIt is possible to memorize the position where you stop playback
and resume playback from that position.
●Be sure to set ARESUMEB
to AONB or ADISC
RESUMEB. (Apg.60)
1Press o during playback to memorize a resume point.
●The unit enters Resume Stop mode and memorizes the
position where you have stopped playback as a resume point.
(The inside of the disc status indicator on the front display panel
blinks while memorizing.)
●The unit retains a memory of the resume points of the last
30 discs played back, even though they have been ejected if
ARESUMEB is set to ADISC RESUMEB. (Apg.60)
●To clear the resume points:
(The inside of the disc status indicator stops blinking and
lights.)
When ARESUMEB is set to AONB:
• Press DVD A to tur n off the unit.
• Press M to take out the disc.
• Press o in stop mode.
• Press TOP ME NU to display the top menu, then start playback by
selecting an item, etc.
• Press MENU to display the disc menu, then start playback by
selecting an item, etc.
When ARESUMEB is set to ADISC RESUMEB:
•ARESUMEB must be set to AOFFB. (Apg.60)
• Press o in stop mode.
• Press TOP ME NU to display the top menu, then start playback by
selecting an item, etc.
• Press MENU to display the disc menu, then start playback by
selecting an item, etc.
2Press I in stop mode to resume playback. The unit starts
playback from the resume point.
NOTES:
●ADISC RESUMEB setting works on DVDVIDEO, VCD, SVCD and
finalized DVD-R/DVD-RW (Video mode) discs. For other types of
discs, the function under AONB setting will be applied even if
ARESUMEB is set to ADISC RESUMEB. (Apg. 60)
●If you stop the playback of a disc for which a resume point has
already been memorized, the memory will be updated with the
new resume point.
●After the unit has memorized the resume points for 30 discs,
remembering a new resume point will cause the unit to delete the
oldest memorized point. Stopping playback of a disc for which a
resume point is already stored may change the order in which the
points are stored. This may potentially change the order in which
points are deleted.
●When the unit memorizes a resume point for a disc, it also
remembers audio language, subtitle and angle settings.
●This function may not work for some Video CD/SVCDs.
●When ARESUMEB is changed to AONB or AOFFB (Apg.60),
resume points of the discs memorized with ARESUMEB set to
ADISC RESUMEB will be cleared.
●Resume points are memorized for each side of a double-sided
disc.
Selection Keys (FGDE)
ENTER
I
T
N/SLOW +
TOPMENU
MENU
S
O/SLOW –
DVD A
M
W
v
o
MARK
ANGLE
REMAIN
SUBTITLE
wATTENTION:
When a playback-only disc is played, pressing o once results in
a blue screen. To perform Resume Function with these discs,
follow the procedures as described below under the blue screen
condition.
DVD SET UP
AUTO TIMER
FUNCTION SET UP
INITIAL SET UP
RESUME
VIDEO IN/OUT
OFF
ON
RECORDING SET
DISPLAY SET OTHERS
SELECT WITH [CURSORS]
THEN PRESS [ENTER]
OK
SELECT
EXIT
SET UP
M100_00.book Page 24 Friday, February 18, 2005 6:23 PM