Masterpage:Right+
EN 35
Filename [M100_06DVD Operation.fm]
BASIC OPERATIONS ON DVD DECK
Instant Timer Recording (ITR)
It is possible to set the recording time during recording. Upon
completing recording, the unit stops and shut off automatically.
1Press R on the unit to start RetroActive Recording.
2Press R again to engage the ITR mode.
●A0:30B is displayed on the front display panel.
3If you want to record for more than 30minutes, press R to
extend the time. Each press extends recording time by
30 minutes.
Normal recording N0:30 N1:00 ... NMaximum disc
remaining time N(Back to the beginning)
NOTES:
●Perform ITR using the R button on the unit.
●The maximum recording time changes depending on the disc
remaining time.
Watch Another Program While Recording On The Unit
While recording is going on, you can watch another program on
the TV. It does not interfere with recording.
1Turn on the TV.
2Select the desired channel to watch on TV using your TV’s
remote control.
Elapsed Recording Time And Disc Remaining Time
Indication
During recording, press DISPLAY repeatedly until the desired
indication appears on the front display panel.
●Each time you press DISPLAY, the time indication changes as
follows:
Elapsed recording time N Disc remaining time N Clock N (Back
to the beginning)
●You can also check the disc remaining time by pressing REMAIN
while the unit is stopped or recording is in progress. The list of
disc remaining times for all recording modes appears on the TV
screen.
Recording Features●Turn on the unit.
●Turn on the TV and select an input mode such as EXT1.
DISPLAY
REMAIN
RAM/RW
R
M100_00.book Page 35 Friday, February 18, 2005 6:23 PM