|
| TROUBLESHOOTING EN 67 | |
|
|
|
|
| THE i.LINK DEVICE THAT YOU HAVE CONNECTED IS NOT | ||
|
| RECOGNIZED | |
DISC NOT REGISTERED IN THE LIBRARY |
| MAKE SURE THAT THE DEVICE IS CONNECTED PROPERLY | |
REGISTER DISC? |
| AND POWERED ON | |
|
|
|
|
●A disc that is not registered in the library has been inserted. Register the disc as necessary. (A pg. 51)
●An attempt has been made to start DV dubbing when a digital video camera is not properly connected to the unit.
●Check the connection. (A pg. 53)
INSERT DISC #XXXX
●Appears when a title that has been selected in the library is not contained in the loaded disc.
CAN NOT RECORD OR MAKE PLAY LIST
DELETE UNWANTED TITLES
●Recording and/or editing cannot be performed.
●The number of titles exceeds 99.
●The number of play lists exceeds 99.
SET CLOCK BEFORE TIMER PROGRAMMING
●To set the timer program, the clock must be set in advance. (A pg. 19)
PROGRAM FULL
DELETE UNWANTED TIMER PROGRAMS
●You can program this unit to timer record as many as
8 programs. To program more, you need to cancel a timer program already set. (A pg. 41)
DISC NOT RECORDABLE
INSERT RECORDABLE DISC
●When a
MEMORY IS FULL
NOTHING MORE CAN BE REGISTERED IN THE LIBRARY IF YOU DELETE UNNECESSARY TITLE INFORMATION,YOU CAN THEN REGISTER ADDITIONAL INFORMATION
●The memory for registration for the Navigation system is full. The recording cannot be started even though the capacity for the recording is enough.
AVAILABLE MEMORY IS LOW
SOON YOU WILL NO LONGER BE ABLE TO REGISTER INFORMATION IN THE LIBRARY
IF YOU DELETE UNNECESSARY TITLE INFORMATION,YOU CAN THEN REGISTER ADDITIONAL INFORMATION
●The remaining capacity of the memory is not enough for registration for the Navigation system. The recording cannot be started even though the capacity for the recording is enough.
CAN NOT SET DISC TIMER PROGRAMING WITH THIS DISC PREPARE A FORMATTED DISC AS DESCRIBED BELOW
●
REGION CODE ERROR CHECK DISC
●A disc loaded cannot be played back on this unit since the region number of the disc does not match that of the unit. (A pg. 8)
UNREADABLE DISC
CHECK DISC
●When an incompatible disc is loaded, I has been pressed. (A pg. 8)
COULD NOT FORMAT THE DISC
CHECK THE DISC
●Formatting is not complete since the disc may be dirty or damaged. Take out the disc, clean it and retry. (A pg. 11, 63)
PRESS [STOP] AGAIN TO STOP RECORDING
●During Live Memory playback, o has been pressed. (A pg. 27)
TIMER RECORDING COMPLETED
●Timer recording has finished during Live Memory playback.
PLAYBACK WILL STOP THEN TIMER RECORDING WILL START
●Timer recording finished during Live Memory playback, then the next timer recording is about to begin while playback continues.
COPY PROHIBITED
CAN NOT RECORD
●An attempt has been made to record
●An attempt has been made to record
COPY PROHIBITED
CAN NOT PLAY
NO DISC INSERTED
●
PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY
●An invalid PlusCode number has been input.
GUIDE PROGRAM IS NOT SET
SELECT CHANNEL YOU WANT TO RECORD
●To set the timer program using the VCR Plus+ system, the Guide Channel Number must be set in advance.
CAN NOT SET VCR PLUS+ TIMER PROGRAMING DURING TIMER RECORDING OR INSTANT TIMER RECORDING CANCEL TIMER RECORDING OR INSTANT TIMER RECORDING, THEN ENTER THE PLUSCODE AGAIN
●Appears when you tried to input a PlusCode number during timer recording or instant timer recording.
COULD NOT FINALIZE THE DISC
CHECK THE DISC
●Finalizing is not complete since the disc may be dirty or damaged. Take out the disc, clean it and retry.
COULD NOT CANCEL DISC FINALIZATION
CHECK THE DISC
●Canceling disc finalization is not complete since the disc may be dirty or damaged. Take out the disc, clean it and retry.
●The unit has detected invalid contents at the start or in the middle of playback.
