Filename [M100_07Timer Recording.fm]
Masterpage:Left+
40 EN TIMER RECORDINGTo Timer Record The Program With The Programmed Disc
1Load a programmed disc.
2Press DVD A to turn off the power.
● appears on the front display panel, and the unit enters
into timer standby mode.
●To disengage the timer mode, press DVD A again.
NOTES:
●On-Disc Timer Programming is not possible on a DVD-R or
DVD-RW (Video mode) disc.
●The information of a program recorded with On-Disc Timer
Programming is not stored in the library.
●The play list is not created for the programs recorded with On-
Disc Timer Programming.
●Programs recorded with On-Disc Timer Programming cannot be
edited or protected.
●On-Disc Timer Programmed discs cannot be used for other
recordings other than On-Disc Timer Programming.
●On-Disc Timer Programmed discs cannot be used on units from
other manufacturers.
●The beginning of a program may not be recorded. In addition, if
the 1st program’s recording stop time and the 2nd program’s
recording start time is the same, the ending of the 1st program
may not be recorded.
●If there is a power outage while recording, the recordings when
the power outage occurs are not guaranteed.
How Discs Are Overwritten
NOTE:
On-Disc Timer Programming may not always work as these
examples.
12/6 12/3
12/5 12/4
12/10 12/7
12/9 12/8
(Example 1)
To record a 1hour serial drama every Friday in SP mode
Blank 2nd 1st
2nd 3rd 4th 3rd
The first program is
overwritten by the third. The second program is
overwritten by the
fourth.
(Example 2)
To record a 15minutes serial drama every morning in XP
mode
(Example 3)
To record a 90minutes serial drama every Sunday in SP
mode
Areas treated as blank
cannot be played back
even if they contain
recorded material.
4th 1st
3rd 2nd
8th 5th
7th 6th
Blank
Blank
Blank
1st
2nd
3rd
1st
M100_00.book Page 40 Friday, February 18, 2005 6:23 PM