| Power |
Diopter Adjustment Control | Switch |
|
PAUSE 
2
1
3
EN11
Viewfinder Adjustment
1 Set the Power Switch to “5S”, “
” or “ 
” while pressing down the Lock Button located on the switch.
2 Pull out the viewfinder fully and adjust it manually for best viewability.
3 Slide the Diopter Adjustment Control until the indications in the viewfinder are clearly focused.
GETTING STARTED
Shoulder Strap Attachment
1 Following the illustration, thread the strap through the eyelet 1, then fold it back and thread it through the buckle 2. Repeat the procedure to attach the other end of the strap to the other eyelet 3, making sure the strap is not twisted.
Tripod Mounting
1 Align the screw and camera direction stud on the tripod with the camera’s mounting socket and stud hole. Then tighten the screw.
•Some tripods are not equipped with studs.
CAUTION:
When using a tripod, be sure to open and extend its legs fully to stabilise the camcorder. To prevent damage to the unit caused by falling over, do not use a
