50
EN
Display
USING
THE
REMOTE
CONTROL
UNIT
(cont.)
Audio Dubbing
6e Audio Dub
Standby mode
Power Switch
The audio track can be customized only when recorded in the
NOTES:
●Audio Dubbing is not possible on a tape recorded in 16- bit audio, on a tape recorded in the LP mode or on a blank portion of a tape.
●To perform Audio Dubbing while watching on the television, make connections (☞ pg. 34, 35).
1 Play back the tape to locate the point where editing will start, then press PAUSE (6).
2 While holding A.DUB (e) on the remote control, press PAUSE (6). “6e” appears.
3 Press PLAY (4) , then begin “narrating”. Speak into the microphone.
•To pause dubbing, press PAUSE (6).
4 To end Audio Dubbing, press PAUSE (6), then STOP (5).
Speaker
MIC (external microphone input) connector*
PHONE (headphones) connector*
Remote sensor
Stereo microphone
DISPLAY |
| |
PLAY | A.DUB | |
| ||
| PAUSE | |
STOP | ||
(provided) | ||
|
To hear the dubbed sound during playback . . .
.... set “12BIT MODE” to “SOUND 2” or “MIX” in the
Menu Screen (☞ pg. 32, 33).
NOTES:
●Audio dubbing is also possible using an optional microphone connected to the MIC connector.
●Sound is not heard from the speaker during Audio Dubbing. To hear sound, connect optional headphones to the PHONE connector.
●When using an optional microphone or headphones, be
sure to attach the core filter to reduce interference (☞ pg. 5).
●While an optional microphone is connected, the
●When editing onto a tape that was recorded at
●If you dub onto a blank space on the tape, the sound may be disrupted. Make sure you only edit recorded areas.
●If feedback or howling occurs during TV playback, move the camcorder’s microphone away from the TV, or turn down the TV’s volume.
●If you change from
●During Audio Dubbing, when the tape moves to scenes recorded in the LP mode, scenes recorded in
*Located beneath the cover.
