JVC GR-DVL9200 36 EN, Playback Advanced Connections, Connection To a Personal Computer

36EN

Power Switch

PLAYBACKAdvancedConnections

Connection To A Personal Computer

To DV OUT	To PC
Core filter

DV cable (optional)

PC connection cable (provided)

To DV	To
connector	RS-232C

PC with DV	PC
connector-equipped
capture board

This camcorder can transfer still images to a PC by using the provided software when connected as shown in the illustration. It is also possible to transfer still images to a PC with a DV connector-equipped capture board installed.

1 Make sure the camcorder and PC are turned off.

2 Connect the camcorder to your PC using the appropriate cable as shown in the illustration.

3 Turn the camcorder’s Power Switch to “ ” while pressing down the Lock Button located on the switch and turn on the PC.

NOTES:

●It is recommended to use the AC Power Adapter/

Charger as the power supply instead of the battery pack (☞ pg. 7).

●Never connect the PC connection cable and the DV cable simultaneously to the camcorder. Connect only the cable you wish to use to the camcorder.

●The date/time information cannot be captured into the PC.

●Refer to the instruction manuals of the provided Software.

●Also refer to the manufacturer’s instruction manual for the DV connector-equipped capture board.

●When using the cables, make sure you connect the end

of the cable with the core filter to the camcorder. The core filter reduces interference (☞ pg. 5).