JVC GR-DVL9200 EN45, Make Connections, JVC VCR equipped with a remote pause connector, Vcr

	Connector
	cover**
	To
To JLIP	S-VIDEO	To AV
(EDIT)
		Core filter
Core filter
	Audio/Video cable
	[mini-plug to RCA plug]
S-Video cable	(provided)
(provided)
Editing cable
(provided)	To AUDIO, VIDEO*
	and	-IN
	connectors
“Y/C”/“CVBS”	If your VCR has the
video out
select switch	SCART connector,
	use the provided
	cable adapter.
To Remote
PAUSE or
R.A.EDIT	VCR

EN45

MAKE CONNECTIONS

Also refer to pg. 34 and 35.

1 To connect to:

A JVC VCR equipped with a remote pause connector . . .

... connect the editing cable to the Remote PAUSE connector.

A JVC VCR not equipped with a remote pause connector but equipped with an R.A. EDIT connector . . .

... connect the editing cable to the R.A.EDIT connector.

A VCR other than above . . .

... connect the editing cable to the RM-V716U’s PAUSE IN connector.

2 Insert a recorded tape into the camcorder and set the

Power Switch to “ ” while pressing down the Lock Button located on the switch.

3 Turn the VCR power on, insert a recordable tape and engage the AUX mode (refer to the VCR’s instructions).

NOTES:

●Before Random Assemble Editing, make sure the indications do not appear on the TV monitor. If they do, they will be recorded onto the new tape.

To choose whether or not the following displays appear on the connected TV . . .

• Date/Time

..... set “DISPLAY” to “ON” or “OFF” in the Menu Screen

(☞ pg. 32).

• Time Code

To PAUSE IN

DISPLAY

RM-V716U (provided)

TV

..... set “TIME CODE” to “ON” or “OFF” in the Menu

Screen (☞ pg. 32).

• Playback Sound Mode and Tape Speed Displays

..... set “INDICATION” to “ON” or “OFF” in the Menu

Screen (☞ pg. 32).

•Playback Sound Mode, Tape Speed and Tape Running

Displays

..... set the Power Switch to “ ” or “5S”. Press MENU/ BRIGHT and set “ON SCREEN” to “ON” or “OFF” in the Menu Screen (☞ pg. 20). Then, set the Power

Switch back to “ ”. Or, press DISPLAY on the RM-V716U remote control.

*Connect when an S-Video cable is not used.

**When connecting cables, open this cover.

ATTENTION FOR EDITING CABLE

•Be careful not to mistake it for the JLIP cable (☞ pg. 4).

•Make sure you connect the end with the core filter to the camcorder.

●When using the cables, make sure you connect the end of the cable with the core filter to the camcorder. The core filter reduces interference.

●Set the video out select switch of the cable adapter as required:

Y/C	: When connecting to a TV or VCR which accepts Y/
	C signals and uses an S-Video cable.
CVBS	: When connecting to a TV or VCR which does not
	accept Y/C signals and uses an audio/video cable.

●When editing on a VCR equipped with a DV input connector, an optional DV cable can be connected instead of an S-Video cable and audio/video cable.

CONTINUED ON NEXT PAGE