JVC GR-DVL9200 specifications Basic Playback, EN31, To Control The Speaker Volume

PLAYBACK

BasicPlayback

EN31

Power			Y OFF
Switch
		A
	P	L
			5S
	Lock Button
Power Zoom Lever (VOL.)
Speaker
Play/Pause Button (4/6)
Rewind Button (2)
Fast-Forward Button (3)
			Stop Button (5)

1 Load a tape (☞ pg. 9).

2 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. To start playback, press 4/6.

•To stop playback, press 5.

•Press 2to rewind, or 3 to fast-forward the tape during Stop mode.

To Control The Speaker Volume . . .

.... slide the Power Zoom Lever (VOL.) towards “+” to

turn up the volume, or towards “–” to turn down the volume.

Still Playback: Pauses during playback.

1)Press 4/6 during playback.

2)To resume normal playback, press 4/6again.

●If still playback continues for more than about 3 minutes, the camcorder’s Stop mode is automati- cally engaged. After 5 minutes in the Stop mode, the camcorder’s power is automatically turned off.

●When 4/6 is pressed, the image may not pause immediately while the camcorder stabilizes the still image. During this time, if PAUSE (6) on the remote control is pressed, Slow-Motion Playback will start. This is not a malfunction.

Shuttle Search: Allows high-speed search in either direction.

1)Press 3for forward or 2for reverse search during playback.

2)To resume normal playback, press 4/6.

●During playback, press and hold 2 or 3. The search continues as long as you hold the button. Once you release it, normal playback resumes.

●A slight mosaic effect appears on screen during Shuttle Search. This is not a malfunction.

Slow-Motion Playback, Frame-By-Frame

Playback, Playback Zoom and

Playback Special Effects

Available only with the RM-V716U remote control (provided) (☞ pg. 42, 43).

PLAYBACK

NOTES:

●If Stop mode continues for 5 minutes when power is supplied from a battery, the camcorder shuts off

automatically. To turn on again, set the Power Switch to “OFF”, then to “ ”.

●The playback picture can be viewed in the LCD monitor, viewfinder or on a connected TV (☞ pg. 34).

●You can also view the playback picture on the LCD monitor with it flipped over and retracted.

●LCD monitor/viewfinder indications:

•When power is supplied from a battery: the “ ” battery pack remaining power indicator is displayed.

When power is supplied through the DC cord: “ ” does not appear.

•During Stop mode, none of the indications are displayed.

●Copyguarded tapes cannot be played back. Only a blue screen is displayed.