











EN5
How To Attach Core Filters
Attach the provided Core Filters to optional DV cable, external microphone or headphones. Core Filters reduce interference.
1 |
| Release the stoppers on both ends of the Core Filter. |
| Stopper |
|
2 | 3 cm | Run the cable through the Core Filter, leaving approx 3 cm of cable |
|
| between the cable plug and the Core Filter. Wind the cable around |
|
| the outside of the Core Filter as shown in the illustration. |
|
| •Wind the cable so that it is not slack. |
NOTE:
Take care not to damage the cable.
External microphone and headphones: Wind once.
DV cable: Wind twice.
3 | Close the Core Filter until it clicks shut. |
■When connecting cables, attach the end with the Core Filter to the camcorder.