JVC GR-DVL9200 specifications EN35

Make sure all units are turned off.

Connect the camcorder to a TV or VCR as shown in the illustration (☞ pg. 34, 35).

If using a VCR . . . go to step 3. If not . . . go to step 4.

Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

EN35

C. Connection to a TV or VCR equipped with an S-VIDEO IN and/or A/V input (RCA type) connectors

	* When connecting the cables, open this cover.
	When the S-Video
	cable is not used.
To AV	←
	Yellow to VIDEO IN
Core filter	TV
Connector
cover*	White to AUDIO L IN
Audio/Video cable
[mini-plug to RCA plug]
(provided)

		Red to AUDIO R IN
				VCR
To S-VIDEO		To S-VIDEO IN	To TV or VCR
		S-Video cable
	Core filter
		(provided)

When connecting the S-Video cable, open the LCD monitor.

PLAYBACK

1

2

3

4 Turn on the camcorder, the VCR and the TV.

5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

To choose whether or not the following displays appear on the connected TV . . .

•Date/Time

.... set “DISPLAY” to “ON” or “OFF” in the Menu

Screen (☞ pg. 32). •Time Code

.... set “TIME CODE” to “ON” or “OFF” in the

Menu Screen (☞ pg. 32).

•Playback Sound Mode and Tape Speed Displays

.... set “INDICATION” to “ON” or “OFF” in the

Menu Screen (☞ pg. 32).

•Playback Sound Mode, Tape Speed and Tape Running Displays

.... set the Power Switch to “ ” or “5S”. Press

MENU/BRIGHT and set “ON SCREEN” to “ON” or “OFF” in the Menu Screen (☞ pg. 20). Then,

set the Power Switch back to “ ”. Or, press DISPLAY on the RM-V716U remote control.

NOTES:

●It is recommended to use the AC Power Adapter/ Charger as the power supply instead of the battery pack (☞ pg. 7).

●When using the cables, make sure you connect the end of the cable with the core filter to the camcorder. The core filter reduces interference.

●To monitor the picture and sound from the camcorder without inserting a tape, set the camcorder’s Power Switch to “5S”, “ ” or “ ”, then set your TV to the appropriate input mode.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.

●If you have a TV or speakers that are not specially shielded, do not place the speakers adjacent to the TV as interference will occur in the camcorder playback picture.

●Set the video out select switch of the cable adapter as required:

Y/C : When connecting to a TV or VCR which accepts Y/C signals and uses an S-Video cable.

CVBS : When connecting to a TV or VCR which does not accept Y/C signals and uses an audio/video cable.