JVC GR-DVL9200 specifications 46 EN, Select Scenes, Fade/Wipe

46EN

USINGTHEREMOTECONTROLUNIT(cont.)

Program
		– –	I N	OUT MODE	Random Assemble
	1		– – : – – ~		Editing Menu
	2			~
3				~
4				~
5				~
6				~
7				~
8				~
		T I ME	CODE	– – : – –
		TOTAL		0 0 : 0 0

Remote sensor

SELECT SCENES

4 Point the remote control at the camcorder’s remote sensor. Press PLAY (4) and then press R.A.EDIT ON/ OFF on the remote control.

The Random Assemble Editing Menu appears.

5 If using a Fade/Wipe at the beginning of the scene, press FADE/WIPE on the remote control.

•Cycle through the effects by pressing repeatedly, and stop when the one you want is displayed.

•You cannot use a Picture Wipe/Dissolve at the beginning of Program 1.

	At the beginning of the scene, press EDIT IN/OUT on
	6 the remote control. The Edit-In position appears in
	the Random Assemble Editing Menu.
	At the end of the scene, press EDIT IN/OUT. The
	7 Edit-Out position appears in the Random Assemble
	Editing Menu.
	If using a Fade/Wipe at the end of the scene, press
	8 FADE/WIPE.
	•Cycle through the effects by pressing repeatedly,
	and stop when the one you want is displayed.
	•If you select a Fade/Wipe effect for an Edit-Out
	point, the effect is automatically applied to the
	following Edit-In point.
RM-V716U	•You cannot use a Picture Wipe/Dissolve at the end
	of the last scene.
(provided)
	•When you use Fade/Wipe effects, that time is

	PLAY		included in the total time (this does not apply to
FADE/WIPE			Picture Wipe/Dissolve).
EFFECT		9	If using Playback Special Effects, press EFFECT
EDIT IN/OUT	R.A.EDIT
			(☞ pg. 43).
	ON/OFF
	CANCEL	10	Repeat steps 6 through 9 to register additional scenes.
			•To change previously registered points, press

CANCEL on the remote control. The registered points disappear, one at a time, from the most recently registered point.

•If you are not using Fade/Wipe or Program AE with special effects, repeat steps 6 and 7 only.

NOTES:

●When choosing a scene, set Edit-In and Edit-Out points so that there is a relatively large difference between them.

●If the search time for an in-point exceeds 5 minutes, the recording deck’s Record-Standby mode will be cancelled and editing will not take place.

●If there are blank portions before or after the Edit-In and Edit-Out points, a blue screen may be included in the edited version.

●Since time codes register time only as accurately as seconds, the time code total time may not match the total programme time exactly.

●Turning off the camcorder’s power erases all registered Edit-In and Edit-Out points.

●If you select Sepia or Monotone mode from Program AE with special effects, you cannot use the Dissolve or Black & White Fader. In this case the Dissolve or Black & White indicator begins blinking. Once the next Edit-In point is registered, the effect is turned off. To combine these effects, use Sepia or Monotone during recording, then use the Dissolve or Black & White Fader during Random Assemble Editing.

●It is not possible to use Fade/Wipe effects and Programme AE with special effects during Random Assemble Editing using a DV cable.