JVC GR-DVL9200 specifications After Use, EN57, Cleaning The Camcorder

Models: GR-DVL9200

1 68
Download 68 pages 40.35 Kb
Page 57
Image 57
To clean the lens, blow it with a blower brush, then wipe gently with lens cleaning paper.

USERMAINTENANCE

EN57

After Use

Cleaning The Camcorder

1 Turn off the camcorder.

2 Slide OPEN/EJECT in the direction of the arrow, then swing the cassette holder cover open until it locks. The cassette holder opens automati- cally. Remove the cassette.

3 Press “PUSH HERE” to close the cassette holder. •Once the cassette holder is closed, it recedes

automatically. Wait until it recedes completely before closing the cassette holder cover.

4 Press and hold BATT. RELEASE and remove the battery pack.

Cassette holder

Remove.

 

OPEN/EJECT

Switch

Cassette holder cover

PUSH HERE

BATT. RELEASE

Button

1

3 2

1 To clean the exterior, wipe gently with a soft cloth.

Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth.

2 Press PUSH-OPENand open the LCD monitor. Wipe gently with a soft cloth. Be careful not to damage the monitor. Close the LCD monitor.

3

4 To clean the viewfinder, raise it to the vertical position. Carefully lift the plastic tab on the bottom of the viewfinder, and open the cover

1.

5 Insert a lens blower or soft cloth into the gap at the bottom of the viewfinder and clean the interior of the viewfinder with it 2.

6 Close the cover. Tilt the viewfinder back to the horizontal position and push it back in.

NOTES:

Avoid using strong cleaning agents such as benzine or alcohol.

Cleaning should be done only after the battery pack has been removed or other power units have been disconnected.

Mould may form if the lens is left dirty.

When using a cleaner or chemically treated cloth refer to the cautions of each product.

Cover

1

2

Lens blower

Page 57
Image 57
JVC GR-DVL9200 After Use, EN57, Cleaning The Camcorder, Press and hold BATT. Release and remove the battery pack