14EN

RECORDING

BasicRecording(cont.)

Zoom in (T: Telephoto)

1 xW

T

 

 

 

 

1 0 xW

T

 

 

 

 

20xW

T

 

 

 

 

40xW

T

Zoom out (W: Wide angle)

Zoom display

1 0 xWT

Digital zoom zone

10X (optical) zoom zone

Approximate zoom ratio

Power Zoom Lever

Power Switch

FEATURE: Zooming

PURPOSE:

To produce the zoom in/out effect, or an instantaneous change in image magnification.

OPERATION:

Zoom In

Slide the Power Zoom Lever towards “T”.

Zoom Out

Slide the Power Zoom Lever towards “W”.

The further you slide the Power Zoom Lever, the quicker the zoom action.

NOTES:

Focusing may become unstable during Zooming. In this case, set the zoom while in Record-Standby,

lock the focus by using the manual focus

(pg. 28), then zoom in or out in Record mode.

In Full Auto mode (when the Power Switch is set to

”), zoom magnification of up to 40X is possible. In Manual mode (when the Power Switch is set to

”), zooming is possible to a maximum of 100X or can be switched to 10X magnification offered by optical zoom.

Zoom magnification of over 10X is done through Digital image processing, and is therefore called Digital Zoom.

During Digital zoom, the quality of image may suffer.

Digital zoom cannot be used when digital image

processing, such as Picture Wipe/Dissolve

(pg. 26, 27) or Video Echo (pg. 25), is activated.

Macro shooting (as close as approx. 5 cm to the subject) is possible when the Power Zoom Lever is set all the way to “W”. Also see “TELE MACRO” in the Menu Screen on page 20.

Page 14
Image 14
JVC GR-DVL9200 specifications 14 EN, Basic Recording, Slide the Power Zoom Lever towards T, Zoom Out