JVC GY-DV5000 Displaying the Time and Date on the Screen, Recording the Date and Time Data

5. PREPARATIONS 5-4 Setting, Displaying and Recording the Date and Time (Cont’d)

5. PREPARATIONS

TIME/DATE menu screen
––– TIME/DATE –––
DISPLAY	ON
DISPLAY MODE	BARS+CAM
DATE REC	OFF
DISPLAY STYLE	DATE+TIME
DATE STYLE	MM/DD/YY
TIME STYLE	24HOUR
SEC DISPLAY	ON
CLOCK ADJUST..
PAGE BACK
CLOCK ADJUST menu screen
DATE (Year/Month/Day)
––– CLOCK ADJUST –––
DATE(MM/DD/YY)	12/12/02
TIME	09:33
PAGE BACK

Time (Hour:Min)

6.

7.

8.

9.

Display the screen for setting the date and time.
Rotate the SHUTTER dial to align the cursor (	) with the
CLOCK ADJUST item, and then press the SHUTTER dial.
● The CLOCK ADJUST screen appears.

Set the date and time.

The blinking digit is the one to be set.

1When the SHUTTER dial is pressed, the blinking digit moves to the next digit.

2When the SHUTTER dial is rotated, the value of the blinking digit changes.

When the SHUTTER dial is rotated upward, the value becomes higher. When rotated downward, the value

becomes smaller.

3Repeat the procedure described in 1 and 2 above to set the month, day, year, hours, minutes.

The digits indicating seconds cannot be set.

4Press the SHUTTER dial in sync with a time signal to enter the date and time precisely.

When all the settings are completed, rotate the SHUTTER dial to align the cursor with the PAGE BACK item, and then press the SHUTTER dial.

●The TIME/DATE menu screen returns.

To return to the normal screen, use either of the following methods. Press the STATUS button or Return to the TOP MENU screen and then select the EXIT item from the TOP MENU screen before pressing the SHUTTER dial.

Displaying the Time and Date on the Screen
TC/UB/CLOCK menu screen
––– TC/UB/CLOCK –––
TC PRESET	00:00:00:00
	EXECUTE
TC CLEAR	CANCEL
UB PRESET	00 00 00 00
	EXECUTE
UB CLEAR	CANCEL
DROP/NON DROP DROP
TIME/DATE..
PAGE BACK
TIME/DATE menu screen
––– TIME/DATE –––
DISPLAY	ON
DISPLAY MODE	BARS+CAM
DATE REC	OFF
DISPLAY STYLE	DATE+TIME
DATE STYLE	MM/DD/YY
TIME STYLE	24HOUR
SEC DISPLAY	ON
CLOCK ADJUST..
PAGE BACK
		FAS
		–3dB
		FAW
		I
		SD
		B
		12.2V
01/02/03 AM01:23:45
Date	Time

Whether or not the time and date should be displayed on the screen and how to display them are set on the TIME/DATE menu screen.

1. Display the TIME/DATE menu screen.

1Select the TC/UB/CLOCK item on the TOP MENU screen.

2Select the TIME/DATE item on the TC/UB/CLOCK menu screen.

2. Set the TIME/DATE menu screen.

●DISPLAY item : Sets whether or not date and time should be displayed. Set to ON to display the indications.

●DISPLAY MODE item : Sets the video output mode in which date and time should be

	displayed.
BARS	: Displayed when the OUTPUT switch
	on the side section is set to BARS.
CAM	: Displayed when the OUTPUT switch
	on the side section is set to CAM.
BARS + CAM	: Date and time are always displayed.

●DISPLAY STYLE : Sets the style in which the date and time are displayed.

DATE + TIME :		Date and time are displayed.
DATE	:	Date only is displayed.
TIME	:	Time only is displayed.

■Display of date and time in the various operation modes.

In Camera mode	:	The date and time of the internal
		clock are displayed.
In VTR playback mode :		The date and time recorded on the
		tape are displayed.
In VTR stop mode	:	The date and time of the internal
		clock are displayed.
During DV signal input :		The date and time from the DV
		connector are displayed.

Recording the Date and Time Data
TIME/DATE menu screen
––– TIME/DATE –––
DISPLAY	ON
DISPLAY MODE	BARS+CAM
DATE REC	BARS+CAM
DISPLAY STYLE	DATE+TIME
DATE STYLE	MM/DD/YY
TIME STYLE	24HOUR
SEC DISPLAY	ON
CLOCK ADJUST..
PAGE BACK

To record the date and time data during shooting, make the menu settings described below. When the DATE REC item on the TIME/DATE menu screen is set to “BARS” or “BARS+CAM”, the screen size will be fixed at an aspect ratio of 4:3.

■Setting the TIME/DATE menu

● DISPLAY item : Set to ON.

●DATE REC item : Select the video mode in which date

		and time data should be recorded.
BARS	:	Date and time data are recorded only
		when color bars are output.
BARS+CAM	:	Date and time data are recorded when
		color bars and camera image are output.
OFF	:	Date and time data are not recorded.

MEMO:

DATE REC cannot be set during recording.

42 43