JVC GY-DV5000 instruction manual Left Side Section, Top Section

2. CONTROLS, INDICATORS AND CONNECTORS

2-3 Left Side Section

PUSH

r

	FRONT
	AUDIO IN
LINE OUT
CH-1	LENS
Y/C OUT	MONITOR OUT

CH-2

e w q

		2. CONTROLS, INDICATORS AND CONNECTORS
2-4 Top Section
e	w	q

BLANK SEARCH REW STOP FF PLAY STILL r

!0o y i t u

1	[MONITOR OUT] Monitor output connector (BNC)
	● Composite video signal output connector.
	● Video signals with setup level are output.
	(Whether or not setup level output should be enabled or
	disabled can be selected with the SETUP item on the
	AUDIO/VIDEO menu screen.)
	Camera mode: The camera image is output.
	VTR mode: The playback image is output in the VTR
	playback mode. When a DV signal (IEEE1394) is input,
	the EE image of the input video signal is output.

MEMO: ● When the OUTPUT CHAR. item on the OTHERS (1/2) menu screen is set to ON, the same on-screen indications as those on the viewfinder will be shown on the external monitor. (Black and white indications) ● The setup signal can be selected also for the EE output signal of the DV input.

2	[Y/C OUT] Y/C output connector (4-pin)
	● Output connector for separate YC video signal.
	● Video signals with setup level are output. (Whether or
	not setup level output should be enabled or disabled can
	be selected with the SETUP item on the AUDIO/VIDEO
	menu screen.)
	Camera mode: The camera image is output.
	VTR mode: The playback image is output in the VTR
	playback mode. When a DV signal (IEEE1394) is input,
	the EE image of the input video signal is output.

MEMO: ● When the ASPECT RATIO item on the CAMERA OPERATION menu screen is set to LETTER, 16:9 aspect ratio distinction ID signal is output. ● When the OUTPUT CHAR. item on the OTHERS (1/2) menu screen is set to ON, the same on-screen indications as those on the viewfinder will be shown on the external monitor. (Black and white indications) ● The setup signal can be selected also for the EE output signal of the DV input.

3	[CH1/CH2 LINE OUT] CH1/CH2 line output
	connector (RCA)
	Output connector for audio signals.
	● Outputs the input audio signal in the Camera mode.
	● Outputs the playback audio signal or DV signal in the
	VTR mode.

MEMO: ● Alarm sound is not output.

4 Microphone attachment holes For attaching the microphone holder KA-A50 (optional) when the optional microphone MV-P615U or MV-P618U is used.

☞See “Attaching the Microphone (optional)” on page 31.

1 Cassette cover
	The cassette cover can be opened by sliding the OPEN
	knob 2. Open this cover to insert or remove a videocassette
	from the unit. Normally, this cover should be closed.
		CAUTION:
	To prevent foreign objects from entering the internal
	parts of the VTR unit, do not leave the unit with the
	cover open for extended periods of time.
2	[OPEN] Cassette cover lock knob
	Slide this knob to open the cassette cover.
3	[EJECT] button
	Located inside the cassette cover.
	Press this button to eject the videocassette.
		MEMO:

●It takes a few seconds before the videocassette is ejected. Do not close the cassette cover during the eject operation.

●Do not touch the cassette insertion slot or cassette during the eject operation. This could result in damage.

●Eject operation is not possible while the power is off.

4 Operation cover Open this cover when operating in the playback mode. Otherwise, keep this cover closed. This cover can be opened by sliding it to the side.

MEMO: When the STOP button (6) is pressed in the Camera mode to set the VTR operation mode indicator to indicate STOP, playback operations become possible.

5	[PLAY] button
	Press to start playback. During still picture playback and
	search mode, press this button to return to the normal
	playback mode.
	* If the auto tracking is active at the moment the play mode
	is entered, the playback video will be interfered with digital
	noise.

6	[STOP] button
	Press to enter the stop mode.
7	[STILL] button
	Press to enter the still picture mode during playback, in the
	stop mode or in the search mode.
	When the still picture mode has continued for about 3
	minutes, the unit automatically switches to the stop mode.
	(Tape protect mode)
8	[FF] Fast forward button
	Press this button to fast forward the tape.
	● Pressing this button in the stop or rewind mode initiates
	the fast forward mode.
	● Pressing this button during playback, still picture playback
	or reverse search initiates forward search.
9	[REW] Rewind button
	Press this button to rewind the tape.
	● Pressing this button in the stop or fast forward mode
	initiates the rewind mode.
	● Pressing this button during playback, still picture playback
	or forward search initiates reverse search.
0	[BLANK SEARCH] button
	Press this button to locate blank parts (unrecorded parts)
	on the tape, such as the end point of a recording.
	Blank search starts when this button is pressed in the stop
	mode. When a blank part (unrecorded part) on the tape is
	detected, the unit enters the STILL status in the VTR mode
	and the Standby status in the Camera mode.

16

17