JVC GY-DV5000 Camera Process Menu Screen, Advanced Process Screen, Skin Color Adjust Screen

11. MENU SCREENS

11-6	CAMERA PROCESS MENU Screen
The CAMERA PROCESS menu screen is only displayed in the Camera mode.
Item			Function	Variation Range	Initial Setting
MASTER	Adjusts the pedestal level (master black), which is the reference of black.			MAX (10)	NORMAL
BLACK	● To increase the pedestal level ..... Increase the number. (UP)			9
	● To decrease the pedestal level .... Decrease the number. (DOWN)			to
				NORMAL (0)
				to
				–9
				MIN (–10)
DETAIL	Adjusts the detail enhancement level.			MAX (10)	NORMAL
	● To sharpen details ....................... Increase the number. (UP)			9
	● To soften details .......................... Decrease the number. (DOWN)			to
		Note:		NORMAL (0)
				to
	When LOLUX is ON, “FIX” is displayed and setting is not possible.
				–9
				MIN (–10)
DTL. V/H	Sets the direction, horizontal (H) or vertical (V), in which stronger detail			H-MAX (5)	NORMAL
BALANCE	enhancement is applied.			4
	To strengthen the H enhancement ...... Increase the number (UP).			to
	To strengthen the V enhancement ...... Decrease the number (DOWN).			NORMAL (0)
				to
		Note:
				–4
	When LOLUX is ON, “FIX” is displayed and setting is not possible.
				H-MIN (–5)
SKIN DTL	Sets the Skin Detail function to ON or OFF.			ON	OFF
DETECT	ON :Skin Detail function activated.			OFF
	OFF :Skin Detail function not activated.
	☞ See “Using the Skin Detail Function” on page 86.
SCAN	Increases the vertical resolution.			VIDEO	VIDEO
	● VIDEO		:Vertical resolution 380 lines.	FRAME MODE

●FRAME MODE :Vertical resolution 450 lines

	Note:
	In the FRAME MODE the bright sections may be coloured depending
	on the colour temperature of the subject.
WHITE CLIP	Sets the point where white clipping is to take place for an input video	108%	108%
	signal with a high luminance level.	100%
	108% :The luminance level is white-clipped at the point of 108%.
	100% :The luminance level is white-clipped at the point of 100%. If the
	screen appears too white even with the point set at 108%, set the
	point at 100%.
KNEE	Sets the knee point (brightness level) when the AUTO KNEE function is	100%	100%
POINT	set to OFF.	96%
		92%
		88%
		84%
		80%
ADVANCED	Displays the ADVANCED PROCESS Screen.
PROCESS	☞ See “ADVANCED PROCESS Screen” on page 71.
PAGE BACK	The TOP MENU returns when the SHUTTER dial is pressed with the	–––––	–––––
	cursor at this position.

					11. MENU SCREENS
11-7	ADVANCED PROCESS Screen
Item				Function	Variation Range	Initial Setting
CINE MODE		When set to ON, produces gamma curve close to the picture characteristics			OFF	OFF
		of movies.			ON
COLOR		Used to set the color matrix. When set to ON, color reproduction becomes			OFF	STD
MATRIX		good. However, noise will increase.			STD
		5 types of color matrix functions are provided.			WARM
		OFF : The function is OFF			EXTRA1
		STD : Standard colour matrix			EXTRA2
		WARM : Colour adjustment with red tinge			EXTRA3
		EXTRA 1 to 3 : To set a color matrix other that those described above.
				Select the desired option.
			Note:
		When CINE MODE is ON, “FIX” is displayed and setting is not possible.
GAMMA		Compensates for the gamma curve that determines the reproducibility of			MAX (2)	NORMAL
		black color.			1
		● To enhance the black color reproducibility. However, halftones will be			to
		lost for white section			NORMAL (0)
			............... Increase the number		to
		● When reproducibility of the black color is not so important			–7
			............... Decrease the number		MIN (–8)
			Note:		OFF
		When CINE MODE is ON, “FIX” is displayed and setting is not possible.
FLARE <R>		For correcting the black level of Rch when the flare phenomenon in which			MAX	NORMAL
		light entering the lens is diffused and results in reflection that colors the			+9
		black portions of the image occurs.			to
		To weaken tinge of red ... Increase the number			NORMAL
		To strengthen tinge of red ... Decrease the number			to
			Note:		–9
		When LOLUX is ON, “FIX” is displayed and setting is not possible.			MIN
FLARE <B>		For correcting the black level of Bch when the flare phenomenon in which
		light entering the lens is diffused and results in reflection that colors the
		black portions of the image occurs.
		To weaken tinge of blue ... Increase the number
		To strengthen tinge of blue ... Decrease the number
			Note:
		When LOLUX is ON, “FIX” is displayed and setting is not possible.
SKIN COLOR		Pressing the SHUTTER dial once when the cursor is at this position			–––––	–––––
ADJUST		switches the screen to display the SKIN COLOR ADJUST screen.
PAGE BACK		The CAMERA PROCESS menu screen returns when the SHUTTER dial			–––––	–––––
		is pressed with the cursor at this position.
11-8	SKIN COLOR ADJUST Screen
Item				Function	Variation Range	Initial Setting
SKIN COLOR		Sets whether it is possible to change the color used by the Skin Tone			STOP	STOP
DET.		Detail function.			EXECUTE
		EXECUTE:Choose this setting to allow detection of the color used by the
		STOP		Skin Tone Detail function.
				:Choose this setting to stop detection of the color used by the
				Skin Tone Detail function.
		☞ See “Using the Skin Tone Detail Function” on page 86.
SKIN COLOR		The setting of this item can only be changed when the SKIN COLOR DET.			WIDE	NORMAL
RANGE		item is set to EXECUTE.			+11
		This setting is for adjusting the skin color range where Skin Tone Detail			to
		functions. (When this item is selected, the area where the Skin Tone Detail			NORMAL
		function is applicable is indicated by zebra patterns on the screen.)			to
		While viewing the zebra pattern range, perform the adjustment.			–11
		Increasing the range ........ Increase the number			NARROW
		Increasing the range ........ Decrease the number
PAGE BACK		The ADVANCED PROCESS menu screen returns when the SHUTTER			–––––	–––––
		dial is pressed with the cursor at this position.

70 71