JVC GY-DV5000 Viewing the LCD Monitor, Setting the Date and Time, Date Style, Time Style

5. PREPARATIONS

5-3 Viewing the LCD Monitor
The LCD monitor’s orientation, angle, and brightness, etc. can be changed.
LCD door	LCD lock and release knob	■ Opening the LCD monitor
		Slide the LCD lock and release knob toward the rear section
		to open the LCD monitor. Grasp the upper and lower edges

5. PREPARATIONS 5-4 Setting, Displaying and Recording the Date and Time

The date and time of the built-in clock should be set. Powered by the built-in backup battery the set date and time data continue to count even when the power is switched off.

●The set date and time data are displayed on the LCD monitor or in the viewfinder and recorded on the tape in accordance with the settings made on the menu screen.

of the LCD monitor to open it easily.

Setting the Date and Time

LCD monitor

■Changing the orientation and angle of the LCD monitor

●With the LCD door in the open position, turn the LCD door. The LCD door can be turned 180 degrees upward and 90 degrees downward.

●If the LCD door is turned 180 degrees upward and housed in the camera body, the LCD monitor can be viewed from outside while it remains housed in the camera body.

SHUTTER dial

2	5600K	1/8		ND
.3	5600K		/64 ND
.4	5600K	1
SHUTTER				STAT
	MENU
AUTO IRIS				FULL
	BACK L

EDITSEARCH

MONITOR

FILTER 3200K 5600K / 5600K 5600K /

SHUTTER STATUS

MENU

AUDIO

LEVEL

CH-1 CH-2

POWER VTR

ONOFF

Upward 180	Downward
	90 degrees
degrees
LCD monitor

LCD monitor

■Displaying on the LCD monitor

●When the DISPLAY button is pressed for a long time, the display on the LCD monitor is switched between ON and OFF.

●Each time the DISPLAY button is briefly pressed while the LCD monitor is used for display, the contents change as follows.

TOP MENU screen
––– MENU –––
CAMERA OPERATION..
CAMERA PROCESS..
AUDIO/VIDEO..
LCD/VF..
TC/UB/CLOCK..
OTHERS..
FILE MANAGE..
MENU ALL RESET		CANCEL
EXIT
TC/UB/CLOCK menu screen
––– TC/UB/CLOCK –––
TC PRESET	00:00:00:00
	EXECUTE
TC CLEAR	CANCEL

POWER switch STATUS button

●The date and time are set on the CLOCK ADJUST menu screen.

When setting while observing on a monitor connected to the VIDEO OUT or Y/C OUT connector, set the OUTPUT CHAR. item on the OTHERS (1/2) menu screen to ON.

1. Set the POWER switch to ON.
2. Press the STATUS button for 1 second or longer to display
the TOP MENU screen.
3. Rotate the SHUTTER dial to align the cursor (	) with the
TC/UB/CLOCK item, and then press the SHUTTER dial in
the direction of the camera body.
● The TC/UB/CLOCK menu screen appears.

AUDIO	DISPLAY button
LEVEL
CH-1CH-2
LCD BRIGHT +/– button
LCD/VF (2/2) menu
––– LCD/VF(2/2) –––
TAPE REMAIN	ON
TC/UB	ON
AUDIO	ON
LCD COLOR	NORMAL
LCD PEAKINGS	NORMAL
PAGE BACK

Image only → Characters displayed magnified

↑ Image and Characters ←

■Adjusting the LCD monitor

●Brightness of screen : Adjust with the LCD BRIGHT +/– button.

● Color saturation	:	Adjust the LCD COLOR item on
		the LCD/VF (2/2) menu.
● Contrast of screen	:	Adjust the LCD PEAKING item on
		the LCD/VF (2/2) menu.

UB PRESET	00 00 00 00
	EXECUTE
UB CLEAR	CANCEL
DROP/NON DROP DROP
TIME/DATE..
PAGE BACK
TIME/DATE menu screen
––– TIME/DATE –––
DISPLAY	ON
DISPLAY MODE	BARS+CAM
DATE REC	OFF
DISPLAY STYLE	DATE+TIME
DATE STYLE	MM/DD/YY
TIME STYLE	24HOUR
SEC DISPLAY	ON
CLOCK ADJUST..
PAGE BACK
MEMO:
The TIME STYLE, SEC DISPLAY and DATA STYLE items
can also be set and changed after the date and time have
been set.

4. Rotate the SHUTTER dial to align the cursor () with the TIME/DATE item, and then press the SHUTTER dial.

●The TIME/DATE menu screen appears.

5. Make settings on the TIME/DATE menu screen. (This
includes display style, etc.)
DATE STYLE	:	Selects the style for displaying the date.
		YY/MM/DD (Year, month, day)
		MM/DD/YY (Month, day, year)
		DD/MM/YY (Day, month, year)
TIME STYLE	:	The time can be set to display as a 12-
		hour or 24-hour clock system.
SEC DISPLAY	:	To select whether or not indication of
		seconds should be displayed on the
		screen.

1Rotate the SHUTTER dial to align the cursor () with the item to be set, and then press the SHUTTER dial.

●The setting area of the selected item starts blinking. 2 Rotate the SHUTTER dial to change the setting, and

then press the SHUTTER dial.

●The setting area stops blinking and the setting is entered.

40

41