58
8. PLAYBACK MODE
■Press the FF button in the stop mode to fast forward the
tape. Press the REW button in the stop mode to rewind the
tape.
■Press the STOP button to stop fast forwarding or rewinding.
8-2 Fast-Forward, Rewind8-3 Search
MONITOR
EDITSEARCH
FILTER
STATUS
SHUTTER
MENU
AUTO IRIS
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
FULL AUTO BLACK LOLUX
MODE
POWER
ON OFF
VTR
OPEN
VTR
CAM
1
3200K
5600K
5600K
5600K
ND
/
/
ND
2
.3
.4
18
1
64
CH-1
AUDIO INPUT
AUDIO SELECT
CH-2
CH-1 CH-2
FRONT
REAR
AUTO
MANUAL
AUDIO
LEVEL
CH-1 CH-2
PULL
OPEN
LCDBRIGHT DISPLAY
STILLSTOPREW
BLANK SEARCH
FF PLAY
FF button
MEMO:
●When the tape approaches the end during fast forwarding
or rewinding, the tape speed decelerates to protect the
tape.
●The time required for fast forwarding and rewinding may
become longer when used in a cold environment. This is
not a malfunction.
■Press the FF button in the play mode or still mode to search
the tape in the forward direction. Playback takes place while
fast forwarding.
Pressing the REW button executes search of the tape in the
reverse direction. Playback takes place while rewinding.
(Each press on the button switches the speed to X5, X9, and
X20.)
■Press the PLAY button to resume normal playback.
■Press the STOP button to stop.
MEMO:
●To output sound during the search, set the A.OUT AT
SEARCH item on the AUDIO menu screen to ON.
●Block noise may appear in the picture or the image may
freeze during the search.
8-4 Blank Search
BLANK SEARCH button This function can be used to locate blank portions (unrecorded
portions) on the tape, such as the end of a recording.
1.
Engage the stop or still mode.
2.
Press the BLANK SEARCH button.
●Blank search starts.
When a blank part (unrecorded part) on the tape is
detected, the unit enters the STILL status in the VTR mode
and the Standby status in the CAM mode.
■To stop blank search, press the STOP button.
MEMO:
“BLANK SEARCH” is indicated on the LCD monitor and in
the viewfinder during blank search. (When the Status
screen is shown.)
BLANK SEARCH
12
.2V
BRSH 01/02/03
AM
––:––:––
Blank search operation indicator
Status screen
REW button
STILLSTOPREW
BLANK SEARCH
FF PLAY
59
8. PLAYBACK MODE
8-5 Outputting CH-3, CH-4 Channel Audio
The DV format is capable of recording up to 4 channels when the 12-bit, 32 kHz sampling frequency is employed. The GY-DV5000
records audio on the two channels CH-1 and CH-2. (4-channel recording is possible in the case of DV input.)
When the GY-DV5000 is used for playback of a tape that was recorded on another unit with audio recorded on the CH-3 and CH-
4 channels, the AUDIO SELECT item on the AUDIO/VIDEO menu screen must be set.
MONITOR
EDITSEARCH
FILTER
STATUS
SHUTTER
MENU
AUTO IRIS
BACK L
NORMAL
SPOT L
STRETCH
NORMAL
COMPRESS
FULL AUTO BLACK LOLUX
MODE
POWER
ON OFF
VTR
OPEN
VTR
CAM
1
3200K
5600K
5600K
5600K
ND
/
/
ND
2
.3
.4
18
1
64
CH-1
AUDIO INPUT
AUDIO SELECT
CH-2
CH-1 CH-2
FRONT
REAR
AUTO
MANUAL
AUDIO
LEVEL
CH-1 CH-2
PULL
OPEN
LCDBRIGHT DISPLAY
STATUS
SHUTTER
MENU
AUTO IRIS FULL AUTO
5600K
5600K
/
ND
.3
.4
1
64
––– MENU –––
AUDIO/VIDEO..
LCD/VF..
TC/UB/CLOCK..
OTHERS..
FILE MANAGE..
MENU ALL RESET CANCEL
EXIT
––– AUDIO/VIDEO –––
TEST TONE ON
AUDIO MODE 32K
A.OUT AT SEARCH ON
CH1 FRONT VR ENABLE
WIND CUT BOTH
AUDIO REF.LEVEL –20dB
AUDIO SELECT CH3/4
AUDIO MONITOR MIX
SET UP 7.5%
PAGE BACK
AUDIO/VIDEO menu screen
MEMO:
After-recording on the CH-3 and CH-4 channels is not
possible.
Setting
■Confirm that the GY-DV5000 is in the VTR mode. (VTR
indicator: On)
1.
Press the STATUS button for 1 second or longer to display
the TOP MENU screen.
2.
Rotate the SHUTTER to align the cursor ( ) with the AUDIO/
VIDEO menu, and then press the SHUTTER dial.
●The AUDIO/VIDEO menu screen appears.
3.
Rotate the SHUTTER to align the cursor ( ) with the AUDIO
SELECT item, and then press the SHUTTER dial.
●The setting area of the selected item starts blinking.
4.
Rotate the SHUTTER dial to change the setting.
CH1/2 :To reproduce the sound (CH-1, CH-2)
recorded during shooting.
MIX :To reproduce the sound recorded during
shooting (CH-1, CH-2) and the after-recorded
sound (on CH-3 and CH-4) simultaneously.
CH3/4 :To reproduce the sound after-recorded on CH-
3 and CH-4.
5.
When the SHUTTER dial is pressed, the set value is
confirmed.
6.
To return to the normal screen, use either of the following
methods.
●Press the STATUS button
or
●Return to the TOP MENU screen and then select the EXIT
item before pressing the SHUTTER dial.
STATUS button
VTR indicator
TOP MENU screen
SHUTTER dial