ENGLISH
161616
16
16
Attaching the Flat Beater,
Wire Whip, and PowerKnead™
Spiral Dough Hook
1. Make sure the speed control
lever is set to the OFF/0 position.
2. Unplug the stand mixer or
disconnect power.
3. Slide selected accessory onto
the beater shaft.
..4. Turn the accessory to the right,
hooking it over the pin on the
shaft.
5. Plug into a grounded
3-prong outlet.
Removing the Flat Beater,
Wire Whip, and PowerKnead™
Spiral Dough Hook
1. Make sure the speed control
lever is set to the OFF/0 position.
2. Unplug the stand mixer or
disconnect power.
3. Press accessory upward and turn
to the left.
4. To remove, gently slide the
accessory down from the
beater shaft.
Beater
Shaft