Device - Image Address Image addressing is used for document tracking, batch control and

tabimage management. The Image Address tab allows you to set an image address starting point. The scanner will increment the image address based on how you set up the image address rules on this tab.

NOTES:

This tab is only available when the scanner is in Image Address mode.

Current value — displays the scanner’s current image address. This value is used by the scanner as the next image address which is assigned to the next document scanned.

Starting Address — allows you to enter a starting image address which overrides the Current value. You can enter a value for each available field, up to the maximum allowed characters for that field. The number of available fields, the field types, and the number of characters allowed per field are based on the Template settings for Format and Field width (see below).

Template

Format: allows you to select the format of the image address. The examples below indicate the available fields.

-Fixed: Fixed

-Level 3: Fixed.Level 3.Level 2.Level 1

-Level 2: Fixed.Level 2.Level 1

-Level 1: Fixed.Level 1

-Level 3 Offset: Fixed.Level 3.Level 2

-Level 2 Offset: Fixed.Level 2

3-38

A-61580 November 2007

Page 66
Image 66
Kodak A-61580 manual Template