Kodak A-61580 manual Start scanning

Models: A-61580

1 104
Download 104 pages 51.92 Kb
Page 11
Image 11
4.Start scanning.

Single-stream duplex alternating between black and white and color/ grayscale using the scanner Toggle patch

Single-stream duplex alternating between black and white and color/grayscale using automatic color detection

The Toggle patch is a type 4 patch that is used to trigger the scanner to switch from the current image stream (black and white) to the alternative image stream (color/grayscale).

1.Prepare documents with a patch Type 4 before and after any color/ grayscale documents.

2.Configure image processing parameters for all four images. Before enabling the scanner, select only the front and back black and white images to be retrieved.

3.Configure the scanner to alternate both sides when a toggle patch is detected.

4.Start scanning.

Images will begin in black and white and will change to color/grayscale when the first toggle patch is detected. Images will remain color/ grayscale until the next toggle patch is detected. Images of the toggle patch sheet will not be returned to the host unless you also enable patch reading and select the Type 4 patch.

1.Configure image processing parameters for all four images. Before initiating the scanner, select only the front and back black-and-white images to be retrieved.

2.Enable Auto Color Detection by choosing Low, Medium, High or Custom.

3.Start scanning.

The scanner will determine if it should return a black-and-white or color/ grayscale image based on a document-by-document analysis of the color content.

A-61580 November 2007

2-7

Page 11
Image 11
Kodak A-61580 manual Start scanning