Creating color/grayscale or black and white images based on the content of your documents

In this example, let’s assume you want to configure a scan session that has a mix of color and black and white documents with information on both sides. In addition, you want the scanner to detect whether the page is color or not, and then output either a color or a black and white image based on that.

1.Select a Setting Shortcut from the main Kodak Scanner window that closely describes your desired output.

2.Select Settings to display the Image Settings window.

3.Select the Advanced Image Setup icon on the Image Settings window to display the Advanced tab.

4.Select Input document is: Two Sided.

5.Select Images per side: One - based on document content.

NOTE: The Images to Configure area will now be displayed on the Advanced tab and contain a color image item and a black and white image item. The Content Settings tab will also be displayed.

6.If you want a grayscale image instead of a color image, when enough color is detected in the document:

make sure Color (24-bit)is selected

select Change to display a list of options

select Grayscale

7.Go to the Content Settings tab.

8. Select a Sensitivity option.

3-24

A-61580 November 2007

Page 52
Image 52
Kodak A-61580 manual Select Grayscale