Feed Direction 180 270 | Kodak A-61580 specs

•Orientation: while the characters are printed vertically (starting at the lead edge of the document) this allows you to select the orientation of the print string. Available options are: 0, 90, 180, 270.

Feed Direction

0

90

180

270

Offset from lead edge — select a value from 0.35 to 33.5 inches to determine how far the printed information will appear from the leading edge of the document.

NOTES:

•Printing automatically stops 6.3 mm (1/4-inch) from the trailing edge of the document even if the information has not been completely printed.

•The horizontal print position is set manually on the scanner. See Chapter 4, The Enhanced Printer and Patch Readers, in the User’s Guide for information on changing the horizontal print position.

A-61580 November 2007

3-35

Image 63

Kodak A-61580 manual Feed Direction 180 270

Contents

Page About this manual Introduction Image outputs FG.jpg Best Practices Scanner setup Initiate polling Error handlingEnable scanning Disable scanningPage Controlling image transfer order Dual stream duplex Dual stream simplexPage Jam and fault recovery Image address format Image file storage locationsBar code recognition Image addressing Single level indexing Starting image addressNext image address Indexing schemes Two level indexing Two level offset indexing Three level indexing Three level offset indexing Generated Automatically Print string formatting Electronic color dropoutLevel rules Controlling print strings Red Dropout  Near Complete Dropout Resolution = 200 dpiContrast% = Threshold = Color Filter = Red dropout Blue Dropout  Near Complete Dropout Green Dropout  Complete DropoutGreen Dropout  Near Complete Dropout Blue Dropout  Complete Dropout Image header information Page Original Black and white image Relative Cropping Zone processing Type 3 Patch Code Programmable keysPatch reading Patch code types Transfer Patch Code Toggle PatchAdditional Patch Codes Batching Installation Overview Terminology and features Using the Twain Datasource Validation Tool Accessing the ScanValidation tool Select StartProgramsKodakDocument ImagingScanPage Main Kodak Scanner window Page Information icons Image Settings window Preview area Toolbar buttons Information icons Cases you will not have to change options on other tabs TabPage November None Landscape Degrees Image Settings Adjustments tabScan as selection of Black and White Image None Filters Noise None Enhancements tab Advanced Image Setup Input document is select Two Sided, One Sided Front, or One Advanced tabPage Done returns you to the Image Settings window November Sensitivity Content Settings tabPage Select Grayscale Select Sides Both Black and White 1-bit Select Sides Both Color 24-bit Make sure Black and White 1-bit is selected Creating multiple images for each side of a document Select Sides Both Color 24-bit Creating different settings for each side of a document Select Sides FrontSelect Sides Back Device Settings window Device General tab Paper sourceDocument Feeder Page Device Printer tab Page Yyyyddd Julian Date Format Feed Direction 180 270 Ultrasonic detection Page Template Do Not Display e.g., A.3.2.1 Display as Spaces e.g., a When Count Reached Device Batch tabReached. Options are none, Level 1, Level 2, and Level November As Level Device Patch tab Feature Device OCP tab Creating a new Setting Shortcut Page Page Main Isis Driver window Using the Isis Driver Main tab Image ModePage Page Image Orientation Layout tab General options When Fixed to Transport or Relative to Document is selected Superior Color options Scanner tab Options TimeoutPower Saver Multi-feed DetectionPage Operations Page Color Content Learn Dropout tab Color DropoutBlank Image Detection Mode Imprinter tab Defining your print string Hyphen -, Period . , Blank or none. For example 08/24/2007Units select Inches, Centimeters or Pixels Image Address tab Level 2 Offset Address%2L Transport End of Job, Continue and Begin New Batch or no Batch/Patch tabBatch Control Go to Level 3 or no action Level 2 or Patch T / Transfer Patch Level Patch Detection Patch 4/Toggle Patch Patch OCP tab Operator Log tab About tab Page Area Appendix a Twain Image Processing Terminology Feature Cropping