Level 2 Offset Address%2L | Kodak A-61580 guide

Image Address fields — displays the starting image address. The values in this field reflect information from the Format String area and the Start Value field in the Counters area. Each field can have a maximum width of 9 characters. The total image address cannot exceed 27 characters (30 with 3 delimiters).

Presets — you can use the selections in the field to automatically fill in the format string field. The options are:

•Custom: enter your desired values.

•Level 3: Address%3L%2L%1L

•Level 2: Address%2L%1L

•Level 1: Address%1L

•Level 3 Offset: Address%3L%2L

•Level 2 Offset: Address%2L

You can have no fixed field or enter any fixed field value. The default fixed field value is Address.

Counters — for each image address level enter a Start Value, Width and make a Level to Follow Level selection.

•Start Value: the start value is reflected in the image address in the field designed by the format string.

•Width: a value of 0 indicates that no image address level will be used. Widths cannot exceed 9 characters.

•Level to Follow: these are the rules the scanner follows to set the next image address level if there are no other inputs. For example, patch sheet or end of batch processing. You will have to define a level to follow level for each of the level fields you defined in your image address.

NOTE: The total value of the Width column plus the number of characters in all fixed fields cannot exceed 27 characters.

Check Digit — this option is only displayed if the scanner is configured with a Check Digit alteration file.

Pages Per Batch — refer to the Batch/Patch tab for more information. This number is displayed on this tab to be used as a reference while formatting your image address.

Format — select the format of the image address string used by the printer and how it is displayed on the touchscreen. The following choices are available for printing the counter format.

• Display Leading Zeros format (e.g., 0009). This is the default.

• Suppress Leading Zeros format (e.g., 9)

•Compress Leading Zeros format (e.g., 9)

A-61580 November 2007

4-19

Image 94

Kodak A-61580 manual Level 2 Offset Address%2L

Contents

Page Introduction About this manual Image outputs FG.jpg Best Practices Scanner setup Disable scanning Error handlingEnable scanning Initiate pollingPage Controlling image transfer order Dual stream simplex Dual stream duplexPage Jam and fault recovery Image addressing Image file storage locationsBar code recognition Image address format Indexing schemes Starting image addressNext image address Single level indexing Two level indexing Two level offset indexing Three level indexing Three level offset indexing Generated Automatically Controlling print strings Electronic color dropoutLevel rules Print string formatting Red dropout Resolution = 200 dpiContrast% = Threshold = Color Filter = Red Dropout  Near Complete Dropout Blue Dropout  Complete Dropout Green Dropout  Complete DropoutGreen Dropout  Near Complete Dropout Blue Dropout  Near Complete Dropout Image header information Page Zone processing Original Black and white image Relative Cropping Patch code types Programmable keysPatch reading Type 3 Patch Code Toggle Patch Transfer Patch CodeAdditional Patch Codes Batching Using the Twain Datasource Installation Overview Terminology and features Select StartProgramsKodakDocument ImagingScan Accessing the ScanValidation tool Validation ToolPage Main Kodak Scanner window Page Information icons Image Settings window Toolbar buttons Preview area Information icons Tab Cases you will not have to change options on other tabsPage November None Landscape Degrees Adjustments tab Image SettingsScan as selection of Black and White Filters Noise None Image None Enhancements tab Advanced Image Setup Advanced tab Input document is select Two Sided, One Sided Front, or OnePage Done returns you to the Image Settings window November Content Settings tab SensitivityPage Select Grayscale Select Sides Both Color 24-bit Select Sides Both Black and White 1-bit Creating multiple images for each side of a document Make sure Black and White 1-bit is selected Select Sides Both Color 24-bit Select Sides Front Creating different settings for each side of a documentSelect Sides Back Device Settings window Paper source Device General tabDocument Feeder Page Device Printer tab Page Date Format Yyyyddd Julian Feed Direction 180 270 Ultrasonic detection Page Template Do Not Display e.g., A.3.2.1 Display as Spaces e.g., a Device Batch tab When Count ReachedReached. Options are none, Level 1, Level 2, and Level November Device Patch tab As Level Feature Device OCP tab Creating a new Setting Shortcut Page Page Using the Isis Driver Main Isis Driver window Image Mode Main tabPage Page Layout tab Image Orientation When Fixed to Transport or Relative to Document is selected General options Color options Superior Scanner tab Multi-feed Detection TimeoutPower Saver OptionsPage Operations Page Color Content Learn Color Dropout Dropout tabBlank Image Detection Imprinter tab Mode Hyphen -, Period . , Blank or none. For example 08/24/2007 Defining your print stringUnits select Inches, Centimeters or Pixels Image Address tab Level 2 Offset Address%2L Go to Level 3 or no action Batch/Patch tabBatch Control Transport End of Job, Continue and Begin New Batch or no Patch Detection Level 2 or Patch T / Transfer Patch Level Patch Patch 4/Toggle Patch OCP tab Operator Log tab About tab Page Area Appendix a Twain Image Processing Terminology Feature Cropping