3.Installation

3.4.3 The footswitch

Function

The footswitch performs the same task as the RUN/STOP and RUN/ENABLE keys (activating/ deactivating motorized sectioning / trimming). In addition, the footswitch can be used to acti- vate the emergency stop function.

Models with footswitch:

All instruments with sectioning motor.

Important note:

In all instrument models that are delivered with footswitch, the footswitch must be installed! - Otherwise the instruments are not functional.

Connecting the footswitch

• Insert footswitch into port (1) and secure.

1

3.5Prior to switching on the instrument

After transport, observe a waiting period of at least 4 hours before turning the instrument on! - See also safety instructions in chapter 2.3.1 ‘Transport’.

Have you observed all safety instructions in chapters 2.3.2 ‘Site requirements’ and 2.3.3 ‘Electrical connections’?

If not:

--> Please read chapters 2.3.2 and 2.3.3!

Insert mains plug into wall outlet.

Continue with chapter 5.1 ‘Setting up the in- strument’.

20

Instruction Manual V1.2 - 11/2006

Page 20
Image 20
Leica CM3050 S instruction manual Footswitch Function, Models with footswitch, Connecting the footswitch