Note: Do not let the thermal grease on the bottom of the heat sink and fan assembly get in contact with anything.
5. Lift the small handle 1 and open the retainer 2 to access the microprocessor 3 .
Figure 45. Accessing the microprocessor
6.Lift the microprocessor straight up and out of the microprocessor socket.
Notes:
•Your microprocessor and socket might look different from the one illustrated.
•Touch only the edges of the microprocessor. Do not touch the gold contacts on the bottom.
•Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be kept as clean as possible.
Figure 46. Removing the microprocessor
7.Ensure that the small handle is in the raised position and the microprocessor retainer is fully open.
8.Remove the protective cover that protects the gold contacts of the new microprocessor.
