Lexmark C77x manual With fax functions

Learning about the MFP

Callout	Control panel item	Function
5	Dial Pause	Press to cause a two- or three-second dial pause in a fax
		number. The button only functions within the Fax menu or
		with fax functions.
		Press from the home screen to redial a fax number.
		When outside of the Fax menu, fax function, or home
		screen, pressing Dial Pause causes an error beep.
		When sending a fax, in the Fax To: field, a Dial Pause
		press is represented by a comma (,).
6	Clear All	When in the function menus, such as Copy, Fax, E-mail,
		and FTP, it returns all settings to their default values, and
		then returns the MFP to the main function screen.
7	Start	Press to initiate the current job indicated on the control
		panel.
		From the home screen, press it to start a copy job with
		the default settings.
		If pressed while a job runs through the scanner, the
		button has no effect.
8	Stop	Press to cause the printing or scanning to stop.
		During a scan job, the scanner finishes scanning the
		current page and then stops, which means paper may
		remain in the automatic document feeder (ADF).
		During a print job, the print media path is cleared before
		the printing stops.
		Stopping appears on the control panel during this
		process.
9	Backspace	Within the Copy menu, which is accessed by touching the
		Copy button, press Backspace to delete the right-most
		digit of the value in the Copy Count. The default value of
		1 appears if the entire number is deleted by pressing
		Backspace numerous times.
		Within the Fax Destination List, press Backspace to
		delete the right-most digit of a number entered manually.
		It also deletes an entire shortcut entry. Once an entire
		line is deleted, another press of Backspace causes the
		cursor to move up one line.
		Within the E-mail Destination List, press Backspace to
		delete the character to the left of the cursor. If the entry is
		in a shortcut, the entire entry is deleted.
10	Asterisk (*)	* is used as part of a fax number or as an alphanumeric
		character.

Understanding the MFP control panel

10