HOW TO INSTALL REFRIGERATOR
1. Connection of Pipe Connector A and B.
1)Turn off main valve of water pipe.
2)Disconnect water tap from piping by loosening nuts.
3)Connect pipe connector A and B to piping after sealing the pipe connector with sealing tapes.
4)Connect feed valve to pipe connector A.
5)If there is only one tap water pipe, connect pipe connector A only and install feed pipe.
Caution : • Feed pipe should be connected to cold water line. If it is connected to hot water line, trouble may occur.
•Please check rubber packing when connecting feed pipe.
Pipe Connector B | Feed |
| |
Hot Water | Valve |
| Pipe Connector A |
| Cold Water |
How to wind
Sealing Tapes.
Single Lever Type Faucet (general)
Feed
Valve
Two Hands Type Faucet
Feed
Valve
General Type
Feed
Valve
Single Lever Type Faucet (one hole, tech type and hand spray)
Feed
Valve
2. Water Supply
1)After the installation of feed water, plug the refrigerator to the earthered wall outlet, press the water dispenser button for 2 - 3 minutes, and confirm that the water comes out.
2)Check leakage at connecting part, then arrange water tube and locate the refrigerator at its regular place if there is no leaking.
Water Tube
Water Tube
Nut
- 12 -
