HOW TO DISASSEMBLE AND ASSEMBLE
2. HANDLE
1) Put blade screwdriver into a groove on the side of a Deco handle and lift up a little bit in arrow direction and push up with hand in arrow direction and disconnect.
2 
1
Handle, Deco
3
4
2) | Put blade screwdriver into a groove on the side of a |
| DECO handle and lift up in arrow direction and push |
| down with hand in arrow direction and disconnect. |
3) | Push up a piece handle in arrow direction with hand |
| and disconnect. |
4)Turn screw in arrow direction with a cross driver and disconnect.
Screw
Handle, Piece
3. SHROUD, GRILLE FAN
1)Loosen two screws after disconnecting a cap screw of a grille fan(U) with a balde screwdriver.
2)Disassembly of a grille fan(U) : Pull forward after opening hook at ➝ part with a blade screwdriver.
3)Disconnect housing A of a grille fan (L) from the main body.
4)Disassembly of a grille fan (L) : Hold upper part of a grille fan(L) and pull forward carefully.
5)Loosen two screws.
6)Disassembly of shroud. F(U) : Disconnect housing of B after removing two rail guides with a blade screwdriver.
7)Disassembly of shroud. F(U) : Hold upper part and pull forward.
8)Check foam PU sticking conditions around a shroud, F(U) and F(L) during assembling. If damaged, torn or badly sticked, assemble with a new one after sealing well.
- 85 -
