LG Electronics MFL67011101 manual Charging with USB, How to Install a microSDTM Card

1.Connect the USB data cable into the wall adapter, as shown below.

Wall Adapter

2.Gently uncover the phone's accessory/ charger port. Then plug the USB data cable (as shown in the next image) into the accessory/ charger port and the other end into an electrical outlet.

NOTICE

Please make sure that the 'B' side is facing up before inserting a charger or data cable into the charger port of your phone.

The charge time varies depending upon the battery level.

Charging with USB

You can use your computer to charge your phone. To be able to charge with the USB cable, you may need to have the necessary USB Driver installed on your PC first. Connect one end of the USB cable to the accesory/charger port on your phone and the other end to a bus-powered USB port on your PC.

NOTE Low-powered USB ports are not supported, such as the USB port on your keyboard or bus-powered USB hub.

NOTE If the phone is about to reset, a warning message will appear on the home screen.

How to Install a microSDTM Card

microSDTM slot

1.Locate the microSD slot on the right side of the phone, then uncover the slot.

19